Advantech ABDNA-ER-DP551 handleiding
Handleiding
Je bekijkt pagina 25 van 79
25
Step
Description
Feature Link
Select Express Setup
This step is optional. If this is the first time the device has
been configured, this page will automatically be displayed.
Select Discovery OEM Device
Name
This parameter allows you to name the device uniquely or
group into a functional set. When device discovery is used,
this name identifies the found device.
If you wanted to uniquely identify the device, you could
mark it with a label e.g. Dev1, and then enter Dev1 in this
field. When the device is found, it will identify itself as
Dev1.
Alternately, you could indicate the type of equipment the
device is attached to e.g. Haas TL-2 (CNC Turning Center),
by giving the unit a name like Haas_TL_2. When
discovered, you can then identify the device you are
accessing.
Enter the text string is you want to change the default
value. This field is optional.
Select Radio Startup Mode
Select On from the drop down menu for the radio to
operate.
Select Wireless LAN
Connection Type
If you are using Access Points, make sure this is set to
Infrastructure from the drop down menu.
If you want to use AdHoc, set this accordingly. Additional
settings may be required to fully configure for AdHoc
mode. These are covered if section 17.2.
Select SSID
Enter the name of the wireless network you want to
access. This field is case sensitive.
Select Wireless LAN Security
Type
Select the security type the wireless network you want to
access is using.
Depending on the option you choose, you may have to
enter additional information. Once you have selected the
security type, the required inputs will be displayed. All
displayed fields must be completed.
If the security type is not in the available selections, more
are available in the WLAN Security Settings page. If you
choose to use this page, make sure you commit the change
before selecting the WLAN Security Settings page.
Select WLAN DHCP
If your WLAN network uses DHCP to assign IP addresses
to the wireless clients, select Enabled from the drop
down menu.
If you are using static IP addresses, select disabled from
the drop down menu. WLAN Static IP and WLAN
Subnet Mask will need to be entered.
Select Ethernet DHCP
If the Ethernet network connected to the Ethernet port
uses DHCP to assign IP addresses to the wired clients, you
should select Enabled from the drop down menu.
If you are using static IP addresses, you should select
Disabled from the drop down menu. Ethernet Static IP
and Ethernet Subnet Mask will need to be entered.
Important: This field is only used if the Ethernet
interface is set as a client (default for devices). If set as a
router, the field is ignored. See section 21.0 for a full
description of configuring the unit as an Ethernet router.
Select WLAN Static IP
This field defines the static IP address for the wireless
interface.
This address is only used if the WLAN DHCP is disabled
or DHCP failed.
Default: 192.168.10.1
Select WLAN Subnet Mask
This field defines the subnet mask used by the wireless
interface.
This mask is only used if the WLAN DHCP is disabled or
DHCP failed.
Bekijk gratis de handleiding van Advantech ABDNA-ER-DP551, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ABDNA-ER-DP551 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15499 MB |
