Advance Spectrum 18D handleiding

Stofzuiger

Advance

36 pagina's

PDF beschikbaar

Handleiding

1. Disconnect the power cord from the electrical outlet.

Push the Filter Cover Latch (19) downwards so that the

cover (18) is released. Remove the ﬁ lter cover from cleaner.

2. Grasp at the ﬁ lter frame and remove the used and dirty

HEPA-ﬁ lter

3. Grasp at the ﬁ lter frame and then insert the new HEPA ﬁ lter

to the cleaner by pushing it in place. (Never touch the ﬁ lter

media of a HEPA-ﬁ lter! Doing so may cause a loss of

performance of the HEPA-ﬁ lter).

4. Snap the Filter Cover back in place at the cleaner.

IMPORTANT!

Never operate the cleaner without the HEPA-Filter in place in the

machine. Note! These machines are not designed for picking up

hazardous - i.e. poisonous dust!

FILTERS - type of ﬁ lter may vary from different models

On these machines there are two different ﬁ lters; one pre-ﬁ lter before the vacuum motor and one exhaust ﬁ lter.

There are two different types of exhaust ﬁ lters available to these machines, HEPA-ﬁ lter and a standard exhaust ﬁ lter. The HEPA-ﬁ lter

(High Efﬁ ciency Particulate Air ﬁlter) offers better ﬁ ltration capacity then the standard exhaust ﬁ lter. The exhaust ﬁ lters catches any

dirt that may escape from the dust bag, or motor pre ﬁ lter. Replace the motor pre ﬁ lter every 5th time that the dust bag is changed

(more often in very dusty applications). The exhaust ﬁ lters are located at the front side of the machine just above the brush base.

The HEPA ﬁ lter can not be cleaned or washed clean. When the HEPA-ﬁ lter is clogged it must be replaced. Replace the exhaust /

HEPA ﬁ lter 1-2 times per year depending on amount of use.

Unplug the power cord from the electrical outlet.

Release the brush roller by unlocking the bearing

block. Push the button backwards left towards the

unlocking symbol at the brush housing.

Grasp at the bearing block and pull it out from the

brush housing.

Remove the used brush.

Replace the used brush roller with a new one, or

clean and remove all debris from the present brush.

Slide back the brush into the the ﬁ xed bearing block

in the brush house.

Push the bearing block in its position. Lock it by

turning clockwise.

CHANGING THE HEPA-FILTER

CHANGING OR CLEANING OF THE BRUSH

Always disconnect the power cord before

performing any machine maintenance.

Instruction for use Advance Spectrum 12 15 18 - 823 0102 020 E.indd 12Instruction for use Advance Spectrum 12 15 18 - 823 0102 020 E.indd 12 4/12/2011 2:25:31 PM4/12/2011 2:25:31 PM

Bekijk gratis de handleiding van Advance Spectrum 18D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.