Advance SC800 handleiding
Handleiding
Je bekijkt pagina 17 van 164
Service Manual: SC750, SC800, SC 750 ST, SC800 ST
Form Number 56043150 Page 17
Machine Maintenance
MAINTENANCE ITEM Daily Weekly Monthly Yearly
Charge Baeries
X
Check/Clean Tanks & Hoses
X
Check/Clean/Rotate the Brush-
es/Pads
X
Check/Clean the Squeegee
X
Check/Clean Vacuum Shut-O
Float
X
Empty/Clean Debris Tray In Re-
covery Tank
X
Clean Hopper on Cylindrical
System
X
Check Each Baery Cell(s) Water
Level (does not apply to gel cell
baeries)
X
Inspect Scrub Housing Skirts
X
Inspect and clean Soluon Filter
X
Clean Soluon Manifolds on
Cylindrical System
X
Purge Detergent System (EcoFlex
only)
X
Lubricate the Machine
X
*Check Carbon Brushes
X
Replace Isolators (REV only)
X
Note: See the individual machine system secons for maintenance informaon.
* Check Carbon Brushes.
• *Check vacuum motor carbon brushes (Qty 2) once a year or aer 300 operang hours.
• *Check brush and wheel drive motor(s) carbon brushes (Qty 4 per motor) once a year or aer 500 operang
hours.
• *The original (new) length of each carbon brush is 1” (25.4mm) on all 24 volt machine models’ brush and wheel
drive motors.
• *All motors: Replace carbon brushes when shorter than 3/8” (9.5mm) to obtain the same motor eciency as
new brushes.
Important
Motor damage resulng from failure to service the carbon brushes is not covered under warranty. See the Limited War-
ranty Statement.
Bekijk gratis de handleiding van Advance SC800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advance |
| Model | SC800 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 85385 MB |
