Advance SC500 handleiding
Handleiding
Je bekijkt pagina 17 van 116
INSTRUCTIONS FOR USE ENGLISH
9099980000 - SC500 15
11/2014
revised 07/2017
MACHINE OPERATION (SCRUBBING/DRYING)
1. Start the machine as shown in the previous paragraph.
2. Lower the squeegee (29) with the pedal (8).
3. Press the One-Touch push-button (43) to lower the brush deck and start scrubbing and drying.
4. Start cleaning by manoeuvring the machine and pressing the paddle (2).
If necessary, adjust the maximum speed with the push-buttons (46).
5. Adjust the solution ow by pressing the push-button (49) as necessary, depending on the type of cleaning to be performed.
NOTE
For the rst 3 ow levels (Fig. 4), the amount of solution dispensed is automatically adjusted according to the machine
speed, in order to obtain a constant amount of solution per linear meter of cleaning.
Level 4 (when enabled) supplies the maximum possible quantity of detergent solution, regardless of the machine speed
(to enable or disable this, see the Supervisor key section in the Maintenance chapter).
The level 0 closes the solution ow completely.
0,75 cl/m
Disc
OFF
1,5 cl/m 3,0 cl/m
2,8 l/min
0,38 cl/mREV™ 0,75 cl/m 1,5 cl/m
4
3
2
1 0
Lev.Lev.
Lev.
Lev.
Lev.
Figure 5
P100858
6. If necessary, to reduce the noise, turn on the mute function by pressing the switch (48).
NOTE
For correct scrubbing/drying of oors at the sides of the walls, Advance suggests to go near the walls with the right side
of the machine as shown in gure 6.
A
B
Figure 6
P100845
CAUTION!
To avoid any damage to the oor surface, turn off the brush when the machine is stationary, especially when the
extra pressure function is on.
7. At the end of the work, press the One-Touch push-button (43) to lift the brush deck. After 10 seconds, the vacuum system
turns off too.
8. Lift the squeegee (29) with the pedal (8).
9099980000(C)07-2017.indb 15 14/06/2017 08:24:06
Bekijk gratis de handleiding van Advance SC500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advance |
| Model | SC500 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 23769 MB |
