Advance SC5000 34D handleiding
Handleiding
Je bekijkt pagina 13 van 122
1/2021 A - 13 56091219 - Advance SC5000
ENGLISH - AINSTRUCTIONS FOR USE
INFORMATION MENU DISPLAY - CONTINUED
Options Menu visible only with yellow (Supervisor) SmartKey.
System Menu visible with either blue (User) or yellow (Supervisor) SmartKey
Menu Level
Notes
1 2 3
Options
User selectable options
Solution
Proportional*
Fixed
UK
Solution mode; Proportional – solution ow
increases with speed of machine. Fixed – Solution
ow stays the same despite machine speed. UK
(United Kingdom) – solution ow is reduced to
conserve water.
Solution In Rev
No*
Yes
Leave solution on in reverse?
Lock Detergent
No*
Yes
Lockout detergent percentage adjustment for user?
Beacon
On*
Off
Beacon light on/off
Burst Of Power (s)
min = 60*
max = 300
step = 60
Burst-of-power (BOP) time span (seconds) EcoFlex
Fwd Speed Max (%)
min = 50
max = 100*
step = 10
Maximum forward speed as percentage of maximum
available speed
Lock Speed Limit
No*
Yes
Lockout scrub speed limit for user?
Inactivity Time (min)
min = 1
max = 30
step = 1
default = 15
Inactivity time before putting machine in sleep mode
(minutes)
Impact Detect
Off*
Log
Lockout
Impact detection status
Log – Impact is recorded
Lockout – Impact is recorded and User is locked
out of scrub functions (Display shows (C26)) until
machine is reset with a Supervisor key.
Impact Level
High*
Low
Impact detection sensitivity level. If nuisance
tripping occurs (i.e. driving over a oor transition),
adjust setting to low.
System
MMC Firmware
Main controller (mmc) rmware revision
UI Firmware
User interface panel (ui) rmware revision
CSP190-Comm F/W
Drive controller comm rmware revision
CSP190-Motor F/W
Drive controller main/motor control rmware revision
MMC S/N
Main controller (mmc) pcb serial number
UI S/N
User interface panel (ui) pcb serial number
Impact Log
Display list of impact events with max value,
timestamp and user id (only if enabled)
- single item view will show max values for each axis
(x,y,z)
*Default setting
SERVICE NOTE: Additional menus (Service and Conguration) are accessible only through service/technician mode. The service menu
allows observing operational and user parameters. The conguration menu allows adjusting machine settings. See Service Manual
for more details.
Bekijk gratis de handleiding van Advance SC5000 34D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advance |
| Model | SC5000 34D |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 22018 MB |
