Advance SC401 handleiding
Handleiding
Je bekijkt pagina 14 van 100
ENGLISH INSTRUCTIONS FOR USE
12 SC401 - 9100002290
09/2017
BEFORE MACHINE START-UP
Brush or pad-holder installation
According to the kind of cleaning to be performed, the machine
can be equipped either with the brush (A, Fig. 2) or the pad-
holder (B) with pad (C) together with the appropriate deck.
1. Place the brush (A) or the pad-holder (B) under the brush
deck (26).
2. (If equipped) Turn the ignition key (41) to “I”.
Press the main push-button (42) to start the machine.
3. Press the main push-button (42, LED on) again.
4. Lower the brush deck by pressing the pedal (10-B).
5. To activate the brush engagement function, press the
push-buttons (44) and (42) simultaneously for one second.
Brush or pad-holder removal
6. Press the main push-button (42, LED o).
7. Lift the brush deck by pressing the pedal (10-A).
8. To activate the brush disengagement function, press the
push-buttons (44) and (42) simultaneously for one second,
then wait for the brush to fall on the oor.
NOTE
When the brush engagement/disengagement function
is activated, the push-button LED (42) ashes.
A
B
C
Figure 2
P100950
Battery type setting
Set the electronic board of the machine according to the type of
batteries installed (WET or GEL) as shown below:
10. (If equipped) Turn the ignition key (41) to “I”.
Press the main push-button (42) to turn on the machine,
then detect the current setting by checking in the very rst
seconds the battery symbol LED ashing (see Figure 2):
11. If the setting is to be changed, press the push-button (44)
for 3 seconds.
12. Within 3 seconds, shortly press the push-button (44) to
select a new setting.
13. Wait 3 seconds for the battery symbol to display the battery
charge status.
WARNING!
In the machines equipped with on-board battery
charger, the installed batteries (WET or GEL/
AGM) may require a specic charging algorithm:
always contact a Advance Service Center to set
the charging algorithm most appropriate for the
installed batteries.
Battery Charging
14. Fully charge the batteries (see the procedure in
Maintenance chapter).
GEL/AGM
WET
Figure 2
P100949
9100002290(A)09-2017.indb 12 24/10/2017 14:24:02
Bekijk gratis de handleiding van Advance SC401, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advance |
| Model | SC401 |
| Categorie | Boenmachine |
| Taal | Nederlands |
| Grootte | 16610 MB |
