Advance ET610 handleiding
Handleiding
Je bekijkt pagina 9 van 40
4/2015 A - 9 56091192 - ET610
REVISED DATE
ENGLISHINSTRUCTIONS FOR USE
PREPARING THE MACHINE FOR USE
1 Inspect the machine, hoses, and cleaning tools for cleanliness and completeness.
2 Screw the Recovery Tank Lid (1) closed. Ensure the Recovery Tank Drain Hose Cap (4) is closed tightly.
3 Pre-spray spots and heavy traffi c areas before extracting with the detergent of your choice. Mix the pre-spray according to the detergent
manufacturer’s directions.
4 Open Solution Tank Fill Opening (9) and fi ll the solution tank with clear water (12.5 gal. / 47 L capacity). If desired, add a detergent or rinse
of your choice (we recommend a CRI approved detergent). If you choose to add a detergent to the solution tank, be sure to mix well, and
always follow the use & dilution instructions on the detergent label. Only use a detergent with a pH between 5 and 10. Although this machine
is designed to supply instant hot water (heated models only), the addition of warm water to the solution tank would increase heater effi ciency.
Never use water above 130º F/54º C in the solution tank.
CAUTION!
Use low-sudsing, liquid detergents designed for carpet extraction.
Bekijk gratis de handleiding van Advance ET610, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advance |
| Model | ET610 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4383 MB |
