Adler AD 9622 handleiding
Handleiding
Je bekijkt pagina 4 van 96
4
1. CAUTION!!! The blades are very sharp!!!
2. Be careful when opening the tank so as not to damage it.
3. Do not bend or deform the perforated blade cover.
4. Take special care when pulling out the blades.
5. Wipe the housing of the device with a dry cloth.
6. Empty the lint container when it is 3/4 full.
7. Straighten the surface of the fabric before use.
9. Do not dent the machine into the fabric it may damage the fabric.
10. Do not use the device on clothes you are wearing, always remove them.
This risks damaging your body or the device.
11. The device has a protective lock. It will not work if the blade cover is not
reinstalled.
12. Take care not to use the device on buttons, zippers, appliques, patches,
stickers, labels, abrasions, seams and joining parts.
13. Do not use the device on garments made of silk, wool or linen. This may
damage the fabrics and damage the blades of the device.
14. Do not use the device near water, e.g.: in the shower, in the bathtub or over
a sink with water.
15. Do not allow the device to get wet. Before using again, the device must be
checked by a qualified electrician.
16. Do not grip the device with wet hands.
17. Turn off the device every time you put it away.
Device description:
1. Battery charge level indicator
2. Battery charging indicator
3. Operating speed indicator
4. ON/OFF button to change the operating speed / power supply
5. USB charging socket, type C
6. Blade cover
7. Blades
8. Rotating shaft
9. Tight knots and crumples receptacle
10. Housing
11. Cleaning brush
12. USB charging cable
BATTERY CHARGING
To start charging, plug the charging cable (12) into the charging socket (5), and then
connect it to the power supply.
When connected to the power supply, the battery charging indicator (2) will light up, and the battery charge level
indicator (1)
will display the current battery charge level.
When the battery is fully charged, the charge level indicator will show 100%. The time to fully charge the battery is
about 2-3 hours. When fully charged, the operating time is about 120 minutes, depending on the selected speed.
The device should not be used while charging.
Bekijk gratis de handleiding van Adler AD 9622, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 9622 |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 10488 MB |
