Adler AD 9618 handleiding
Handleiding
Je bekijkt pagina 4 van 76
4
The device has a protective lock. It will not function unless the blade cover (6) is refitted.
The device should not be used while charging.
1. Switch off the device by pressing the button (4).
TECHNICAL DATA:
Power Nom.: 5W, Power Max.: 10W
3. Move the device back and forth across the material.
4. Clean the blade cover (6), the blades (7), and the rotating shaft (8) with the included brush (11).
6. For fabrics with a pattern, move the device in the direction of the pattern.
2. Switch on the device by pressing the button (4), the device has three speeds. To increase the speed, press button (4) again. Available
speeds: 6500, 7500, 8500 rpm
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
Power supply: USB 5V/1A
USING THE DEVICE
1. Place the garment (fabric) on a flat surface, and smooth out the wrinkles.
4. Stubborn knots can be removed by moving the device across and then along ("checkered") on one small piece of clothing.
5. Thin garments can be defrosted by placing them on flat, rigid cardboard.
2. Unscrew the blade protection cover (6) counter clockwise.
5. Empty the knots and lint container (9).
When the battery is fully charged, the battery level indicator will show 100%. The time to fully charge the battery is 2-3 hours. When fully
charged, the run time is approximately 120 minutes, depending on the selected speed.
6. After cleaning, reassemble all the disassembled parts.
CLEANING
9. Do not press the device into the fabric as this may damage the fabric.
16. Do not handle the device with wet hands.
13. Do not use the device on silk, wool, or linen garments. This can damage fabrics and
damage the shaver blades.
3. Working speed indicator 4. Button for changing the working speed / ON OFF power
7. Blades 8. Rotary shaft
BATTERY CHARGING:
To start charging, plug the charging cable (12) into the charging socket (5) and then connect it to the power supply.
When connected to power, the battery charge indicator (2) will illuminate and the battery charge indicator (1) will display the current
battery charge.
5. USB type C charging port 6. Blade Cover
12. Take care not to use the device on buttons, zips, appliqués, patches, stickers, labels,
rips, seams, and seams.
11. The device has a protective lock. It will not function unless the blade cover is refitted.
Device description:
1. Battery level indicator 2. Battery charging indicator
14. Do not use the device near water, e.g. in the shower, bathtub, or over a wash basin
with water.
9. Bin for knots and pilling 10. Housing
11. Cleaning brush 12. USB charging cable
10. Do not use the device on clothes you are wearing, always take them off. This may
cause personal injury or damage to the lint remover.
15. Do not allow the device to get wet. Before using the appliance again, it must be
checked by a qualified electrician.
17. The device should be turned off each time it is put away.
Bekijk gratis de handleiding van Adler AD 9618, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 9618 |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 6552 MB |
