Adler AD 7342 handleiding
Handleiding
Je bekijkt pagina 4 van 76
4
13. Use only the original USB cable provided in the package.
14. Unplug the device when cleaning or moving the device.
15. For best results, place the device on a higher surface, such as a table or
countertop.
16. Do not allow foreign objects to get inside the device.
17. Do not block the front and rear grilles of the device.
18. Do not cover the device.
19. Do not immerse the device under water or in other liquids.
WARNING: Rotating parts may pull out loose clothing and hair.
BEFORE FIRST USE
The battery must be fully charged before use. Use only the supplied USB charging cable (A connector and type C plug).
CHARGING:
1. Before charging, check and make sure the power source is compatible with the device.
2. Remove the power cord provided with the device and plug it into a USB Type-C outlet.
3. During charging, the LED indicator flashes red. The LED indicator lights up red continuously when the battery is fully charged.
PRODUCT DESCRIPTION:
1. On/off and fan speed button
2. Housing
3. USB type C socket
4. Propeller
6. USB connector (A connector and type C plug)
7. LED indicator
8. Mounting clamp / stand
USE OF THE DEVICE:
1. Press the on/off button once to turn on the device and set a low airflow speed. To get a medium air speed flow press the on/off button
a second time. To get a high air speed flow press the on/off button a third time. To turn the unit off, press the on/off button a fourth
time.
These precautions apply to products that use built-in rechargeable batteries.
Improper use of batteries may cause electrolyte leakage, overheating or explosion. Released electrolyte is a source of corrosion and can
be toxic. It can cause skin and eye burns; it is also harmful if swallowed.
To reduce the risk of injury:
- Batteries should not be heated, opened, punctured, destroyed or thrown into a fire;
- Do not touch the battery terminals in the device with metal objects. These components can become hot and cause burns;
- In case of battery leakage, avoid contact of leaking electrolyte with skin or clothing. If battery electrolyte comes into contact with skin
or clothing, immediately flush the area with water.
- Charge only with the charger supplied with the product, or one suitable for the battery type.
The chemical composition of the built-in battery used: lithium
TECHNICAL SPECIFICATIONS:
USB 5V 1A POWER INPUT
BATTERY: 3.7V 3000mAh; battery: lithium battery
POWER: 5W
Dimensions: 200×125×280mm
Bekijk gratis de handleiding van Adler AD 7342, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7342 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 9666 MB |
