Adler AD 7335 handleiding
Handleiding
Je bekijkt pagina 4 van 80
4
17. Do not block the front and rear grilles of the device.
18. Do not cover the device.
19. Do not immerse the device under water or in other liquids.
WARNING: Rotating parts may pull out loose clothing and hair.
BEFORE FIRST USE
The battery must be fully charged before use. Use only the supplied Micro USB charging cable.
CHARGING:
1. Before charging, check and make sure that the power source is compatible with the device.
2. Remove the power cord (9) supplied with the device and plug it into the Micro USB jack (8).
3. Charge the fan as needed for at least 8 hours if not used for more than 3 months to extend battery life. The LED indicator (5)
lights up green when the battery is fully charged. During charging, the LED indicator (5) lights red.
PRODUCT DESCRIPTION:
1. CASE
2. LED LIGHT
3. FIXING CLAMP
4. HANDLE
5. LED INDICATOR
6. ON/OFF BUTTON AND FAN SPEED SWITCH
7. LED SWITCH BUTTON
8. MICRO USB SOCKET
9. USB WIRING
DEVICE USAGE:
1. Press the ON/OFF power button (6) once to turn on the device and set a low airflow speed. To get a medium air speed flow
press the ON/OFF power button (6) a second time. To get a high air speed flow press the ON/OFF power button (6) a third time. To
turn the unit off, press the ON/OFF power button (6) a fourth time.
2. Press the LED switch button (7) once to set a strong light intensity. To set medium light intensity press the LED switch button (7)
a second time. To set low light intensity press the LED switch button (7) a third time. Press the LED switch button (7) a fourth time
to turn off the device.
3. If the LED indicator (5) lights up green, it means that the product is already fully charged.
Important safety information regarding the battery
These precautions apply to products that use built-in rechargeable batteries.
Improper use of batteries can cause electrolyte leakage, overheating or explosion. Released electrolyte is a source of corrosion
and can be toxic. It can cause skin and eye burns; it is also harmful if swallowed.
To reduce the risk of injury:
- Batteries should not be heated, opened, punctured, destroyed or thrown into a fire;
- Do not touch the battery terminals in the device with metal objects. These components can become hot and cause burns;
- In case of battery leakage, avoid contact of leaking electrolyte with skin or clothing. If battery electrolyte comes into contact with
skin or clothing, immediately flush the area with water.
- Charge only with the charger supplied with the product, or one suitable for the battery type.
The chemical composition of the built-in battery used: lithium-ion
TECHNICAL SPECIFICATIONS:
5V USB POWER INPUT
POWER: 6W
BATTERY: 3.7V 1800mAh; battery: lithium-ion
CHARGING TIME: 7 hours
DIMENSIONS: 105x153x199mm
Bekijk gratis de handleiding van Adler AD 7335, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7335 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 9733 MB |
