Adler AD 7070 handleiding
Handleiding
Je bekijkt pagina 9 van 228
9
Warning. May cause burns.
Device Description (A):
1. Soft tube
2. Device
3. Steam gun
4. Handle
5. LED light
6. Lid and storage compartment for accessories.
7. Cap with pressure valve
8. Wheel
9. On/off power switch
10. Power plug
Accessories:
A. Extension tube ×2
B. Ironing brush ×1
C. Glass tip ×1
D. Large nozzle ×1
E. Floor brush ×1
F. Carpet pad ×1
G. Cord retractor ×1
H. Ironing towel ×1
I. Round brush ×1 ( Made of stainless steel)
J. Round brush ×1 (Made of nylon)
K. Floor brush towel ×1
L. Floor brush connection ×1
M. Funnel x1
Steam Gun Design (B):
1. Steam nozzle
2. Accessory lock
3. Adjustment button
4. Child lock
5. Steam button
Before first use:
1. Remove all packing materials from the machine and accessories.
2. Check the condition of the power cord and other accessories and that they are not damaged.
Usage:
1. Lift the cover (6) and the accessory box.
1. Unscrew the steam valve nut (7A).
2. Pour demineralized water into the water container. No more than 1.5 liters.
3. Turn off the cap with the steam valve (7A).
4. Familiarize yourself with the installation of the appropriate accessories by reading the section of the
manual directly assigned to these accessories.
5. Turn on the device using the power switch (9A).
6. On the Steam Gun (3A), find the adjustment knob (3B) and set the required amount of steam. During
use, you can use the knob if the amount of steam is insufficient or too much.
7. Wait until the LED (5A) turns green to indicate that the device is ready for operation. During operation,
the LED may turn red. This is normal. If the amount of steam decreases it means that the amount of water
in the tank is insufficient. Turn off the device. Wait until it cools down then unscrew the cap. Add water and
wait until it heats up again.
7. Press the steam button (5B). If the button does not move check if the child lock (4B) is not engaged.
8. The device will start producing steam.
9. When finished, turn off the device after by pressing the On/Off Switch (9A) and let it cool down before
putting it away.
10. If you plan to use the device for a long time, you can press the Steam Generation button 5B) and then
toggle the Child Lock (4B). This will lock the steam generation button (5B) in the open position and
Bekijk gratis de handleiding van Adler AD 7070, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7070 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21025 MB |
