Adler AD 7052 handleiding
Handleiding
Je bekijkt pagina 9 van 108
9
15. Once you are finished using the device turn off the steam generation and the motor and unplug the device. You can turn off the Mop
and Stem generation function at the same time by pressing and holding the steam select (7) button for 3 seconds.
16. Remove the mop pads and wash them.
CAUTION: DO NOT USE FLOOR WASHER WITHOUT PADS. IT WILL DAMAGE THE DEVICE AND FLOOR.
CAUTION: MAKE SURE THE DEVICE HAS COOLED DOWN BEFORE REMOVING THE MOP PADS.
CAUTION: The device is now emitting steam. DO not point at people, children, animals or other heat sensitive materials.
a. Main nozzle (21) – Used for hard to use places such as between cupboards or corners.
10. You can now use the Steam select button (7) to choose the intensity of steam generation.
e. Window scraper (17) – Used for windows of big tiles. Can also be used with the towel on to to collect the water or on more sensitive
areas.
CAUTION: DO NOT TOUCH THE MAIN STEAM NOZZLE OR THE ATTACHMENT DURING USE. TURN OFF THE DEVICE AND LET
THE ATTACHMENT TO COOL DOWN BEFORE REMOVING.
c. Round Big brush (15) – To clean bigger surfaces for example kitchen counter.
TROUBLESHOOTING:
The device should NOT BE USED on: Leather, waxed furniture, synthetic fiber, velvet or fine materials sensitive to steam.
1. Device does not generate steam:
f. Scraper attachment (18) – Used for iron pans or removing old dirt and grease.
Steam cleaner function:
6. Attach the main nozzle (21) by pressing the button at the base of the attachment and pushing it in place as shown on page 7.
9. Insert the attachment onto the nozzle and twist for the peg to fall in place and so the attachment does not move during use.
d. Crevice brush (16) – Best used to clean between tiles.
You can use the device without the rotating mop attachment and use it as an steam cleaner in a much easier to handle form. To do that
please follow the below instructions:
2. Remove the rotating mop attachment by pressing the button near the main device steam outlet as shown at the bottom of page 4.
5. Attach the steamer handle (13) in the place where the telescopic rod was placed.
7. You can also add any of the other attachments on top of the main nozzle or use the main nozzle as is.
8. To add the other attachments please choose the needed attachment and inside you will find a grove, it will correspond with the peg on
the main nozzle.
11. To remove the attachments wait for them to cool down and turn them in the other direction and pull them off.
g. Round small nozzle (19) – Used for smaller areas.
b. Curved nozzle (14) – To reach behind something or under something like behind kitchen faucet.
Attachment descriptions and suggested use:
1. Remove the telescopic handle from the main body by pressing the button at the back of the device and pressing the release button as
shown on page 5.
The device can be used on sealed hard floor surfaces. It is recommended that you first test the device on a piece of flooring that is not
visible and consult the maintenance instructions of the floor manufacturer.
For which floors is the device suitable for:
CAUTION: DO NOT USE ANY CLEANING SOLUTION, PERFUME, OIL OR OTHER CHEMICAL SUBSTANCES TO THE WATER USED
DIRECTLY WITH THIS PRODUCT. IT MIGHT DAMAGE THE PRODUCT OR MAKE IT UNSAFE TO USE. USE ONLY PURE WATER.
4. The mop pads do not rotate or sway.
2. When using the rotating floor cleaner the steam is not consistent.
a. Ensure they are properly put onto the cleaner and are put on the correct way.
Technical details:
3. The rotating floor cleaner does not rotate.
a. Ensure the device is plugged and turned on correctly.
5. Vibration or swing of the steam floor washer.
a. Check if the power plug of the device and if the device is turned on correctly.
Voltage: 220-240V~ 50/60 Hz
Rated Power: 1300 W
d. Please wait at least 30 seconds after turning the steam generation on.
c. If the indicator light is on and the device should generate steam.
Water tank capacity: 550 ml
e. After checking all the above points and still no steam generation is occurring please contact the customer service.
Steam generation: 16-28g / min
b. Make sure the water tank is filled and inserted correctly.
a. Change the steam generation to High.
a. The mop pads are not attached correctly.
Rotation speed: 110-130 rpm
b. Make sure the rotating floor cleaner is connected correctly.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
Bekijk gratis de handleiding van Adler AD 7052, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 7052 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9404 MB |
