Handleiding
Je bekijkt pagina 6 van 136
6
PRODUCT DESCRIPTION (FIG. 1)
1. - handle
2. - temperature control switch
3. - switch
4. - plastic base
5. - air inlet filter
6. - air concentrator
USE OF THE DEVICE
1. Remove the dryer from the plastic base (4).
2. Set the desired temperature with the switch (2):
0 - off 1 - warm air 2 - hot air 3 - very hot air
3. Press the switch (3) and hold to dry the hair.
4. To turn off the device remove your finger from the switch.
For safety reasons, the dryer works only when you press the power button (3).
INSTALLATION INSTRUCTIONS
Before mounting on the wall, make sure that there are no hidden electrical circuits or pipes at the installation
site.
Tools needed: screwdriver, hammer and electric drill.
Included with the hair dryer are: 1 plastic base, 2 long screws, 2 wall plugs for mounting the base, 4 rubber hole
plugs.
Remove all the above items from the package.
1. Choose an installation site, drill holes in the wall according to the size of the dowels needed to hang the base.
Insert the plastic studs into the drilled holes so that the ends of the studs are flush with the wall.
2. Insert the screws into the holes of the base (4). Put the plastic base (4) against the wall so that the screws are
flush with the studs. Using a screwdriver, screw the screws into the wall studs until the clearance between the
base (4) and the wall disappears. Make sure that the base holds firmly to the wall.
3. Insert the rubber plugs into the holes located in the base.
4. Hang the dryer on the base.
The installation is complete.
CLEANING AND MAINTENANCE
1. Regularly clean the air inlet filter (5) of loose hair or other dust.
2. Clean the dirty housing with a damp soft cloth and then wipe it dry. Do not use any aggressive detergents.
3. Avoid liquids from reaching the inside of the dryer.
TECHNICAL DATA
Power: 1700-2000W
Voltage: 220-240V~ 50-60Hz
For the sake of the environment. Cardboard packaging and polyethylene (PE) bags should be disposed of in the appropriate
containers for separate collection of municipal waste according to their description. If there are batteries in the device, remove them
and separately return them to the collection and storage facility. Return the used device to a suitable collection and storage facility,
as the hazardous substances in it may pose a health and environmental hazard. The marking on the product indicates that the device
should not be disposed of in the container with municipal waste. Waste electrical equipment, is waste that contains substances
harmful to humans, animals and the environment. These substances can lead to contamination of the soil, water or air, and through
this they can get into the human body and lead to numerous health ailments, such as: vision, hearing, speech disorders, they can also
lead to kidney, liver and heart damage, and cause skin diseases. Harmful substances can also have adverse effects on the respiratory
and reproductive systems and lead to cancerous changes. Consumption of plants growing on the complained of soils, and products
made from them may risk the above-mentioned health effects. Do not dispose of the device in the municipal waste container!!!
Service If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt.
Bedienungsanleitung (DE)
ALLGEMEINE SICHERHEITSBEDINGUNGEN
WICHTIGE SICHERHEITSHINWEISE FÜR DEN
Bekijk gratis de handleiding van Adler AD 2285, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adler |
| Model | AD 2285 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 13086 MB |
