Adj WiFLY NE1 handleiding
Handleiding
Je bekijkt pagina 13 van 22
13
OPERATION
LOADING FIXTURE PROFILES
NOTE: The WiFly NE1 comes pre-loaded with Generic xture proles, which include RGB, RGBW,
RGBA, RGBWA, RGB- WAU, TRI-WHITE, 36CH 8-Bit ML (M1), and 36CH 16-Bit ML (M2). See the
Generic xture traits chart section on page 18 for channel details. All other proles can be loaded from
the USB stick, which is included. The USB stick includes several ADJ proles, which are compatible
with this controller. Because the le names are abbreviated, due to character limitations, please us the
“Fixture Prole Details” PDF list to cross reference the les. So your controller runs at optimum speed,
please only load the proles that you will be using. A maximum of 65 pro- les can be loaded at a time.
1. With the controllers power switch OFF, insert the included USB drive into the controllers USB port
and power ON the con- troller.
2. Press and hold down the SET-UP button for two seconds to enter the main menu.
3. Select menu option 1 (Load Light Lib) by pressing the DIAL/ ENTER dial then turn the DIAL/ENTER
dial to nd the prole that you wish to load.
4. Once you have located the prole, press the DIAL/ENTER dial to load it. The display will momentarily
read “Operation Complete”. Repeat steps 3 and 4 to load additional proles or press the ESC/PAGE
button to exit.
Delete Light Lib
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 2 (Delete Light Lib). Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to nd the prole that you wish to delete or select “delete all lib” to delete
all proles. Press the DIAL/ENTER dial to enter.
4. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/ ENTER dial to enter. Press the ESC/
PAGE button to exit.
Patch Light Lib
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 3 (Patch Light Lib). Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to nd the prole that you wish to patch. Press the DIAL/ENTER dial to
enter.
4. Press the xture button(s), 1-12, that you wish to patch the selected prole to and turn the DIAL/
ENTER dial to set the starting address. Press the DIAL/ENTER dial to enter. Press the ESC/PAGE
button to exit.
Delete Patch Light
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 4 (Delete Light Patch) then select the xture(s), 1-12, that
you wish to delete from the patch. Press the DIAL/ENTER dial to execute.
3. Turn the DIAL/ENTER dial to select “Yes”. Press the DIAL/ ENTER dial to execute.
Edit Light Lib
Note: WiFly NE1 allows for channel defaults to be set for PAN, TILT, COLOR, and GOBO channels
when the prole is being created. If you wish to edit these defaults or set automatic de- faults for other
channels, this is where you do this.
1. Press the SET-UP button for two seconds to enter the main menu.
2. Select the xture(s), 1-12, that you wish to edit. Turn the DIAL/ENTER dial to menu option 5 (Edit
Light Lib). Press the DIAL/ENTER dial to enter. Turn the DIAL/ENTER dial to select the xture that
you wish to edit. Press the DIAL/ENTER dial to save and conrm.
3. Turn the EFFECT dials, 1-4, to adjust the relevant channel data. Turn the DIAL/ENTER dial to
access additional channels. Press the DIAL/ENTER dial to save and conrm.
Bekijk gratis de handleiding van Adj WiFLY NE1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY NE1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2537 MB |
