Adj WiFLY EXR QA12BAR IP handleiding
Handleiding
Je bekijkt pagina 9 van 16
ADJ Products, LLC - www.adj.com - WiFly EXR QA12Bar IP User Manual Page 17ADJ Products, LLC - www.adj.com - WiFly EXR QA12Bar IP User Manual Page 16
WiFly EXR QA12Bar IP ADJ RFC Operation
The ADJ RFC remote (sold seperately) has many different functions and al-
lows you to control your WiFly EXR QA12Bar IP from long distance. The ADJ
RFC remote can control your system up to 150 ft. To use the RFC you must
first activate the fixtures receiver, to activate the receiver please see the in-
structions on page 12.
BLACkOUT - Pressing this button will blackout the fixture. Press this button
for more then 3 seconds to return to default settings.
AUTO RUN - This button will activate Auto Run. You can control the speed
of the Auto Run using the “+” and “-” buttons. Press the FLASH button to
activate strobing and use the “+” and “-” buttons to adjust the flash rate.
PROGRAM SELECTION - This button has two functions; it can activate
Static Color mode and Program mode. Each press of the button will switch
between the two modes. In Static Color mode use the “+” or “-” buttons to
scroll through the 64 colors. Once you have found your color, you can press
the FLASH button to activate strobing and use the “+” or “-” to adjust the
Flash rate. In Program mode, use “+” or “-” buttons to scroll through the 22
different programs. Press the SPEED button and use the “+” or “-” buttons
to adjust the program speed. Press the FLASH button to enter strobe mode
and use “+” or “-” buttons to adjust the flash rate. Press the FLASH button
twice to enter the fade setting and use “+” or “-” buttons to adjust the fade
speed.
FLASH - This button will activate the flash (strobe) effect. You can control
the flash speed using the “+” and “-” buttons.
SPEED - Press this button and use the “+” & “-” buttons to adjust the speed
in Program mode.
SOUND ACTIVE - This button is not used with fixture.
R G B W/A - Press either one of these buttons and use the “+” or “-” to ad-
just the brightness. Press the FLASH button to activate strobing and use the
“+” or “-” buttons to adjust the Flash rate.
“+” and “-” - Use these buttons to adjust the flash rate, select your desired
program, adjust the program speed, Auto Run fade speed, RGBA bright-
ness, and to scroll through the Static colors.
WiFly EXR QA12Bar IP 4 Channel Mode
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
WiFly EXR QA12Bar IP 5 Channel Mode
Bekijk gratis de handleiding van Adj WiFLY EXR QA12BAR IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | WiFLY EXR QA12BAR IP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2524 MB |
