Adj VS1 FLEX 45 handleiding
Handleiding
Je bekijkt pagina 7 van 28
7
SAFETY GUIDELINES
• DO NOT touch panel housing during operation. Turn OFF power and allow approximately 15 min-
utes for panel to cool down before servicing.
• DO NOT operate devices with covers open and/or removed.
• DO NOT shake panel, and avoid brute force when installing and/or operating.
• DO NOT expose any part of the panel to open ame or smoke. Keep panel away from heat sourc-
es such as radiators, heat registers, stoves, or other appliances (including ampliers) that produce
heat.
• DO NOT install/use in extremely hot/humid environments, or handle without ESD precautions.
• Operating ambient temperature range is from -20°C to 40°C (-4°F to 104°F). DO NOT operate this
device when ambient temperature is outside this range, as doing so will result in damage.
• DO NOT operate if power cord is frayed, crimped, damaged, and/or if any of the power cord
connectors are damaged and do not insert into the panel securely and with ease. NEVER force
a power cord connector into the panel. If the power cord or any of its connectors are damaged,
replace immediately with a new cord and/or connector of the same power rating.
• DO NOT block air ventilation slots/vents. All fan and air inlets must remain clean and never
blocked.
• Allow approximately 6” (15cm) between panel and other devices or a wall for proper cooling.
• ALWAYS disconnect panel from main power source before performing any type of service and/or
cleaning procedure.
• Only handle the power cord by the plug end, and never pull out the plug by tugging the wire por-
tion of the cord.
• ONLY use the original packaging materials and/or case to transport the panel in for service.
• PLEASE recycle shipping boxes and packaging whenever possible.
• To avoid causing physical damage, read the installation instructions carefully before installation.
• Panels should be installed/operated by qualied and trained professionals ONLY.
• Always mount panels in a safe and stable manner.
• INDOOR / DRY location use ONLY! Outdoor use will void the manufacturer’s warranty.
• Wear appropriate safety equipment during panel installation.
• Turn OFF power to panel, computers, servers, system boxes, and monitors before making any
type of power or data connections and before performing any maintenance work.
• Electronics used in this panel are ESD (Electrostatic Discharge) sensitive. To protect device from
ESD, wear a grounded ESD wrist strap or similar grounding device when handling panel.
• Panel must be properly grounded before operating. (resistance must be less than 4Ω)
• Ensure all power is disconnected from panel before unplugging any data cables from the panel,
especially serial line ports.
• Route power and data cables so that they are NOT likely to be walked on or pinched.
• Air conditioning is required if operating environment temperature exceeds 30°C (86°F).
• If panels are not in regular use for an extended period, it is advised to test run the devices for 2
hours each week to ensure that they remain in proper working condition.
• Cases used to transport panel must me properly waterproofed for transportation.
Bekijk gratis de handleiding van Adj VS1 FLEX 45, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | VS1 FLEX 45 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8152 MB |
