Adj Vizi Spot LED Pro handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 24 van 28
American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 47 American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 48
Vizi Spot LED PRO Changing the Gobo
This unit comes with interchangable gobos. When changing
the gobos please be very careful. Follow the instructions below,
and see the gure pictures on the next page.
Caution! Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the bottom half of the
moving head. The bottom half of the moving head does not
have the lens in front. The lens is on the top half of the head
(Figure 1).
2. Unscrew the 4 phillips screws that secure the bottom half
shell. Remove the bottom half of the shell.
3. When you remove the shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change (Figure 2).
4. You have to remove the individual gobo set-up. Gently push
the gobo frame (Not the wheel) away from the gobo wheel,
you do not have to push gobo frame to far (Figure 3). While
you are pushing the gobo frame away from the wheel, pull
the gobo frame up and out (Figure 4). This is done easier
using a small flathead screwdriver.
5. Once the gobo frame has been removed, remove the fixture-
ring and gobo. The fixture ring can be removed by using a
small flathead screwdriver. The fixture ring should easily
come out of the frame. After the fixture ring is removed, re
move the gobo.
6. Change the gobo, replace the fixture ring. When inserting
the gobo frame back into the unit, the bottom of the gobo
frame must slide underneath the metal place holder located
at the bottom of the gobo wheel (Figure 5).
7. Reassemble the unit.
Channel Value Function
12 RESET & INTERNAL PROGRAMS
94 - 96 NO FUNCTION
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE PROGRAM
Vizi Spot LED PRO 12 Channel Mode

Bekijk gratis de handleiding van Adj Vizi Spot LED Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAdj
ModelVizi Spot LED Pro
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4684 MB