Adj Vizi Spot LED Pro handleiding

Niet gecategoriseerd

Adj

28 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 28American DJ® - www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 27

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

When you exit this function, the unit will begin to reload

data.

FEED - With this function you can switch the Pan/Tilt error

correction on and off. This will automatically correct the

Pan/Tilt if it is somehow moved out of place.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “FEED” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “ON” to acti-

vate this function, or “OFF” to deactivate this function.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

FANS - With this function you can choose between the fan

settings of Low, High or Auto. The default setting is Auto.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “FANS” is displayed, press ENTER.

3. Press the UP or DOWN buttons to select either “LOW”, “HIGH”,

or “AUTO”.

4. Press ENTER to conrm your selection.

5. Press MODE/ESC to return to the main menu.

HIBE - With this function you can make the unit auto-

matically shut down the lamp and stepping motors. The

default setting for this is 15 mins. After 15 mins if the unit

Vizi Spot LED PRO System Menu

If you want the set the address to 420, set Channel 1s’ value to

“7”, Channel 2s’ value to “8”, and Channel 3s to “164”. (256 +

164 = 420)

SPOT - With this function you can adjust the LED via

the control board. The shutter opens and the LED can be

adjusted. In this mode, the device will not react to any con-

trol signal.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “SPOT” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to select “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

DFSE - With this function you can restore the factory

settings of the device. All settings will be set back to the

default values. Any edited scenes will be lost. When restor-

ing the factory settings the unit must be set to the address

that the unit was in when you started editing.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DFSE” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to display “ON” to activate this function,

or “OFF” to deactivate this function.

Vizi Spot LED PRO System Menu

Bekijk gratis de handleiding van Adj Vizi Spot LED Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.