Adj Vizi Roller Beam 2R handleiding
Handleiding
Je bekijkt pagina 16 van 30
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 31
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 30
Vizi Roller Beam 2R System Menu Vizi Roller Beam 2R System Menu
as well.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Service Settings” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “RDM PID” is displayed, and
press ENTER.
4. “XXXXXX” will be displayed. “XXXXXX” represents the units current
RDM ID.
5. Press ENTER or press MODE/ESC to exit.
Fans Control
Auto Fan Speed - With this function you can adjust the speed of the
running fans.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Fans Control” is displayed,
press ENTER.
3. Either “Auto Fan Speed” (default), “Low Fan Speed”, or “High
Fan Speed” will be displayed, use the UP and DOWN buttons to
toggle between.
4. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Display Setting
Shuto Time - With this function you can have the LCD display after
2-59 minutes. Use this function to adjust the time.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Shuto Time” is displayed,
and press ENTER.
4. “05m” (5 minutes) will be displayed, use the UP and DOWN but-
tons to adjust the shuto time between 02m-60m or “O”.
5. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Display Reverse - With this function you can rotate (ip) the display
180 degrees.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Display Reverse” is displayed,
and press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Key Lock - With this function activated the buttons will lock autom-
matically after 15 seconds.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Key Lock” is displayed, and
press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
Bekijk gratis de handleiding van Adj Vizi Roller Beam 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Roller Beam 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4548 MB |
