Adj Vizi Q Wash7 handleiding
Handleiding
Je bekijkt pagina 34 van 41
Vizi Q Wash7 WiFly Set Up
Vizi Q Wash7 WiFly Primary-Secondary Set Up
With this feature you are able to control the unit with DMX without the need of XLR
cables. Your DMX controller must be connected to a ADJ WiFly TransCeiver to use this
function. You are able to communicate up to 2500 feet/760 meters (open line of sight).
1. Follow the instructions on page 33 to activate WiFly and set the Wireless address.
The address must match the address set on the WiFly Transceiver.
2. After you have set the WiFly address, follow the DMX instructions on page 24 to
select your desired DMX Channel mode and set your DMX address.
3. Apply power to the ADJ WiFly Transceiver. The xture must be set up rst before you
apply power to WiFly Transceiver.
Note: If the sync does not work, switch the WiFly power off then on again.
This feature will let you link units to run in a primary-secondary mode without the use of
XLR cables.
1. Follow the instructions on page 33 to activate WiFly and set the Wireless address.
The address must match the address set on the WiFly Transceiver.
2. After you have set the WiFly address, select your primary unit and set your desired
operating mode.
3. For the Secondary units, put the unit in Secondary mode. See page 40 Primary-
Secondary conguration when setting the unit as a Secondary.
NOTE:Iftheydonotsyncupprimary-secondary,switchthePrimaryxtures
WiFly off then on again.
ADJ Products, LLC — www.adj.com — Vizi Q Wash7 — Page 34
Bekijk gratis de handleiding van Adj Vizi Q Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Q Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5770 MB |
