Adj Vizi Pix Z19 handleiding
Handleiding
Je bekijkt pagina 45 van 51
45
PRIMARY-SECONDARY SET UP
This function allows you to link units together to run in a Primary-Secondary set-up, in which one unit
will act as the controlling unit and the others will react to the controlling unit’s built-in programs. Any
unit can be configured to act as a Primary or as a Secondary, but only one unit in a given system can
be programmed to act as the Primary.
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connectors on the rear panels of each unit. Use standard XLR
data cables to link your units together. Remember that the male XLR connector is the input and
the female XLR connector is the ouput. The first unit in the chain (primary) will use the female XLR
connector only. The last unit in the chain will use the male XLR connector only.
2. Use the display screen and control panel to navigate to Personality > Prim/Sec Mode. Select
this sub-menu using the ENTER button, and use the UP and DOWN buttons to toggle between
“Primary” and “Secondary”. Press ENTER to confirm your selection.
3. Repeat Step 2 for each unit in the system. Make sure that only one unit is designated as the
Primary, while all other units are designated as Secondaries.
4. The secondary units will now follow the behavior of the primary unit.
NOTES:
• Only one unit should be congured as the primary, while all the other units should be congured
as secondaries.
• All units should be set to the same DMX channel mode.
• If xtures fail to sync, verify that all settings mentioned above are the same, then power all devices
off, then switch them on again to re-establish the link.
MULTI UNIT POWER LINKING
This features allows you to connect the fixtures to one another using the power cable input and output
sockets.
The maximum number of units that can be linked in this manner is as follows:
• 3 units when running on 230V power.
• DO NOT POWER LINK UNITS WHEN RUNNING ON 120V POWER!
DO NOT EXCEED THIS MAXIMUM NUMBER WHEN POWER LINKING UNITS!
All linked units must be of the same make and model type. Do not mix and match units!
Bekijk gratis de handleiding van Adj Vizi Pix Z19, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Pix Z19 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5204 MB |
