Adj Vizi Hybrid 16RX handleiding

Niet gecategoriseerd

Adj

24 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 32 ADJ Products, LLC - www.adj.com - Vizi Hybrid 16RX Instruction Manual Page 33

To enter the Oset Menu, press the ENTER button for at least 3 sec-

onds. In this submenu you are able to adjust the home position of the

pan, tilt, shutter, color wheel, both gobo wheel’s, RGobo (Rotating)

wheel, prism, R (Rotating) Prism, and focus position.

Pan - Adjustment of the pan home position.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Pan” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

TILT - Adjustment of the tilt home position.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Tilt” is displayed, press ENTER.

Vizi Hybrid 16RX Offset Menu

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Shutter - Setting adjustment for the Shutter.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Shutter” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Color - Setting adjustment for the color wheel.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Color” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Gobo1 - Setting adjustment for the 1st gobo wheel.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Gobo1” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Gobo2 - Setting adjustment for the 2nd gobo wheel

(glass gobo wheel).

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Gobo2” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Vizi Hybrid 16RX Offset Menu

Bekijk gratis de handleiding van Adj Vizi Hybrid 16RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.