Adj Vizi BSW 300 handleiding
Handleiding
Je bekijkt pagina 25 van 36
25
OFFSET MENU
Gobo2 - Setting adjustment for gobo wheel 2.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
“Gobo2” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Prism - Setting adjustment for the 1st prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Prism”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Prism2 - Setting adjustment for the 2nd prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
“Prism2” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
R-Prism - Setting adjustment for the rotating prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that
“R-Prsim” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Angle/Frost - Setting adjustment for the frost lter.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Angle/
Frost” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Focus - Setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “Focus”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
ERROR CODES
If any of these warning’s appear and you are not certain on what form of action needs to be taken, please contact
ADJ customer support for more information.
Temp. Sense Error
This will appear when the temperature check board is damaged.
CPU-8 Error, CPU-C Error, CPU-D Error
This will appear when the PC board or wires are damaged.
Memory Initial Fail
This will appear when the memory IC is damaged.
Temperature Sense Error
This will appear when the temperature check board is damaged.
Random Error Messages
Pan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt Encode Error, Shutter Reset Fail, Dimmer Reset Fail,
Color Reset Fail, Gobo Reset Fail, R-Gobo1 Reset Fail, Gobo2 Reset Fail, Prism Reset Fail, R-Prism Reset Fail,
Prism2 Reset Fail, Focus Reset Fail, Angle/Frost Reset Fail.
These Error messages may appear when turning on or reseting the unit. Please contact ADJ customer support.
Bekijk gratis de handleiding van Adj Vizi BSW 300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi BSW 300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6572 MB |
