Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 24 van 34
24
SYSTEM MENU
Manual Control - With this function you can easily adjust the lamp. All effects will be canceled, the
shutter will open and output intensity will be 100%. With the individual functions you can focus the light
on flat surface (a wall) and finely adjust the lamp.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Effect Adjust” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Manual Control” is displayed, press ENTER.
3. Use the UP or DOWN buttons to scroll through the various functions. Press ENTER when you find
the function you would like to adjust.
4. Press ENTER or press MODE/ESC to exit.
Calibration - With this function you can calibrate and adjust the effects wheels to their correct positions.
The Calibration password 050.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Effect Adjust” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Calibration” is displayed, press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE/ESC to exit.
USER MODE SET
User Mode -
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“User Mode Set” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “User Mode” is displayed, press ENTER.
3. Use the UP or DOWN buttons to scroll through the 3 DMX Channel Modes:
Standard Mode - This is 12 Channel Mode.
Basic Mode - This is 10 Channel Mode.
Extended Mode - This is 16 Channel Mode.
4. Press the MODE/ESC button once to return to the “User Mode Set” menu. Use the UP or DOWN
buttons to scroll through the Edit modes. Press ENTER to select any of the Edit modes.
Edit User Mode – This function allows the user to make the actual changes in the user defined modes
that are created in the previous function.
EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows custom
programs to be installed and recalled directly from the fixture’s control board. Programs can be created
and stored using the fixture’s control board or by using an external DMX controller.
Select Program – This function allows the user to select one of ten of the user defined built-in programs.
This program is then accessed in “Function Mode” under “Program Run.”
Edit Program – This function allows the user to edit the built-in programs.
Edit Scenes – This function allows the user to edit or define the actual scenes that are stored in the
user defined built-in programs that are accessed in the previous step.
Rec Controller - The Vizi Beam Hybrid 2R features an integrated DMX recorder. Preprogrammed
scenes can be transmitted to the fixture via any DMX compliant controller. This function allows those
scenes to be stored in to the fixture’s built-in memory and then subsequently used to create the user-
defined programs.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
