Adj Vizi Beam 5RX handleiding
Handleiding
Je bekijkt pagina 9 van 33
9
MAINTENANCE GUIDELINES
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an extended
life. The frequency of cleaning depends on the environment in which the xture operates: damp,
smoky, or particularly dirty environments can cause greater accumulation of dirt on the xture’s optics.
Clean the external lens surface regularly with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There are no user
serviceable parts inside this xture. Please refer all other service issues to an authorized ADJ service
technician. Should you need any spare parts, please order genuine parts from your local ADJ dealer.
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer every three months, to make sure the
circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out
during normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the housing, color lenses, rigging hardware, and rigging points
(ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the
xture. Damaged rigging points or unsecured rigging could cause the xture to fall and seriously
injure a person(s).
• Electric power supply cables must not show any damage, material fatigue, or sediments.
NEVER remove the ground prong from the power cable.
FUSE REPLACEMENT
Warning: If you continue to blow lamps or fuses, STOP using the unit. Contact customer support
for further instructions, you may have to return the unit for servicing. Continuing to use the unit may
cause serious damage.
Unplug the unit from any power source it may be connected to. Once the power has been disconnected,
use a at head screw driver to open the fuse holder located underneath the power input socket. Remove
the bad fuse and replace with a new one, and screw the fuse holder back in. Only replace fuse with a
new fuse of the same type and rating.
MULTIPLE UNIT POWER LINKING
With this feature you can connect the xtures to one another using the power cable input and output sockets.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES AS THE POWER CONSUMPTION
OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON THIS FIXTURE!
CHECK SILK SCREEN FOR MAX AMPS.
Bekijk gratis de handleiding van Adj Vizi Beam 5RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam 5RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6901 MB |
