Adj Vizi Beam 5RX handleiding
Handleiding
Je bekijkt pagina 23 van 33
23
OFFSET MENU
OPAN - Adjustment of the pan home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oPAn”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OTLL - Adjustment of the tilt home position.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “otLL”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
ODNN - Setting adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “odnn”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OCOL - Setting adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oCoL”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OGOB - Setting adjustment for the gobo wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oGob”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OPRI - Setting adjustment for the prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oPrI”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
ORPR - Setting adjustment for the rotating prism.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “orPr”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OFRO - Setting adjustment for the frost lter.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oFro”
is displayed, and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
OFOC - Setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP or DOWN buttons so that “oFoC”
is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to conrm.
Press the MENU button for one second to exit.
Bekijk gratis de handleiding van Adj Vizi Beam 5RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam 5RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6901 MB |
