Adj Starship handleiding
Handleiding
Je bekijkt pagina 25 van 32
ADJ Products, LLC - www.adj.com - Starship User Manual Page 25
Starship Opening Mode - Auto Mode
Primary-Secondary Configuration:
This function will allows you to link units together to run in a Primary-Secondary mode. In Primary-
Secondary operation one unit will act as the controlling unit and the others will react to the controlling
units built-in programs. Any unit can act as a Primary or as a Secondary; however, only one unit can be
programmed to act as the “Primary.”
Primary-Secondary Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data cables
to link your units together. Remember that the male XLR connector is the input and the female XLR
connector is the output. The first unit in the chain (primary) will use the female XLR connector only.
The last unit in the chain will use the male XLR connector only.
2. Set the “Primary” unit to your desired operating mode.
3. Pressthe MENU button to enter the main system menu. Press the UP or DOWN buttons so that
“Personality” is highlighted and press ENTER.
4. Pressthe UP or DOWN buttons so that “Primary” is highlighted and press ENTER. Highlight “ON”
and press ENTER, then press the MENU button to exit.
5. For the “Secondary” unit(s) press the MENU button to enter the main system menu. Press the UP
or DOWN buttons so that “Personality” is highlighted and press ENTER.
6. Pressthe UP or DOWN buttons so that “Secondary” is highlighted and press ENTER. Highlight
“ON” and press ENTER, then press the MENU button to exit. The “Secondary” unit(s) will now
follow the “Primary” unit.
AUTO MODE/SOUND ACTIVE:
This function will allow the unit to run its auto program. The auto program can be run normally or in a
sound active state with adjustable sound sensitivity.
1. Press the MENU button to enter the main system menu. Press the UP or DOWN buttons so that
“DMX Settings” is highlighted and press ENTER.
2. Pressthe UP or DOWN buttons so that “No DMX Status” is hightlighted and press ENTER.
Press the UP or DOWN buttons so that “AUTO” is highlighted and press ENTER.
3. Pressthe MENU button to exit to the main system menu. Press the UP or DOWN buttons so that
“Personality” is highlighted and press ENTER. Highlight “Primary” and press ENTER. Select
“ON” and press ENTER. NOTE: Make sure that the “Secondary” Mode is “OFF”.
4. Press the MENU button to exit to the main system menu. Press the UP or DOWN buttons so that
“AUTO” is highlighted and press ENTER.
5. When entering the the AUTO menu, you have the choice of running the AUTO mode as sound
active and adjusting the sound sensitivity. “000” being the least sound sensitive, and “100” being
the most sound sensitive.
6. Make your desired adjustments and press the MENU button to exit to the main system menu.
Press the MENU button again so that the DMX address is displayed.
Starship Primary-Secondary Configuration
Bekijk gratis de handleiding van Adj Starship, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Starship |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3758 MB |
