Adj MOD QW100 handleiding
Handleiding
Je bekijkt pagina 29 van 32
MOD QW100 Housing Change
1
2
3
4
5
6
Start by unscrewing
and removing the
bracket knobs.
Once the knobs and bracket
have been removed, unscrew
and remove the safety cable
screw.
When the screw has been
removed the and safety cable
is disconnected you are able
to remove the innards through
the top of the unit.
You are now able to switch
shells by carefully lowering
the innards into the new case
and reassemble. Reconnect the
safety cable and attache the
bracket and knobs.
MOD QW100 Frost Filter
The MOD units housing is interchangeable. You can purchase the white housing kit through ADJ.
Changing the housing is very simple process. Follow the instructions below to change the housing.
For more help contact ADJ Customer Support.
The MOD QW100 comes with 3 interchangeable frost lters. To install the frost lter unscrew the four
thumb screws holding lens in place. Remove the lens and install the lter inside the unit. Line up the
thumb screw holes on the edges of lter with screw holes of the unit. Screw the thumb screws back
into place securing the lens. For help contact ADJ Customer Support.
ADJ Products, LLC - www.adj.com - MOD QW100 User Manual Page 28
Bekijk gratis de handleiding van Adj MOD QW100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | MOD QW100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3356 MB |
