Adj MOD QA60 handleiding
Handleiding
Je bekijkt pagina 30 van 32
ADJ Products, LLC - www.adj.com - MOD QA60 User Manual Page 29
MOD QA60 Trouble Shooting
MOD QA60 Cleaning
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on
some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
MOD QA60 Multiple Unit Power Linking
With this feature you can connect the xtures to one another using the power input and output
sockets. The maximum that can be connected is 10 xtures @ 120V and 18 xtures @ 240V.
After the maximum connected xtures you will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE MOD QA60 AS THE
POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
Bekijk gratis de handleiding van Adj MOD QA60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | MOD QA60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3384 MB |
