Adj Mega QA Go handleiding
Handleiding
Je bekijkt pagina 9 van 25
ADJ Products, LLC — www.adj.com — Mega QA Go - User Manual — Page 9
Mega QA Go Operating Instructions
System Menu: The display will lock after 30 seconds, press the MODE button for 3 seconds to unlock.
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE button until “don” is displayed,
press the UP button to display “doff”. Now the display will disappear after 10s. Press any button to turn
the display on again. Be advised though that the display will turn off automatically after 10 seconds.
To set the display press the MODE button until “dXX” is displayed. Use the UP or DOWN buttons to
select either: “don” = LED display on at all times. “doFF” = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to ip the display 180° so that the display can be read upside down.
1. Plug the xture in and press the MODE button until “dXX” is dis- played. “XX” represents either “on”
or “oFF”.
2. Press the SET UP button until “Stnd” is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.
Energy Saving Mode:
1. Plug the xture in and press the MODE button until “bXXX” is dis- played. “XX” represents the
current battery life.
2. Press the SET UP button so that “bSXX” is displayed.
3. Press the UP or DOWN buttons to turn enery saving mode either “On” or “Off”.
Operating Modes:
The Mega QA Go has ve operating modes:
• RGBA Dimmer Mode - Choose one of the four colors to remain static or adjust the intensity of each
color to make your desired
• color.
• Sound-Active mode - The unit will react to sound, chasing through the built in programs. There are
16 sound active modes.
• Auto Run Mode - In Auto Run mode, you can choose 1 of 16 color change modes, 1 of 16 color fade
modes, or a combo color change & fade mode.
• Static Color Mode - There are 64 colors to choose from.
• DMX control mode - This function will allow you to control each individual xtures traits with a
standard DMX 512 controller.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tailored
to their own individual needs. This function also allows you to use your xtures as spot lights. The
Mega QA Go has 8 DMX modes: 1 channel mode, 2 channel mode, 3 channel mode, 4 channel mode,
5 channel mode, 6 channel mode, 7 channel mode, and 8 channel mode. See page’s 20-27 for each
mode’s DMX traits.
1. This function will allow you to control each individual xture’s traits with a standard DMX 512
controller.
2. To run your xture in DMX mode press the MODE button until “d.XXX” is displayed. “XXX” represents
the current displayed DMX address. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel mode.
Bekijk gratis de handleiding van Adj Mega QA Go, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Mega QA Go |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3132 MB |
