Adj Inno Spot LED WiFLY handleiding

Niet gecategoriseerd

Adj

14 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 13

BLND - Blackout or Stand by mode.

1. Press the MENU button until “BLND” is displayed, press ENTER.

Either Yes or No will be displayed.

2. To activate Blackout tap the UP or DOWN buttons until “Yes” is

displayed, press ENTER to conm. The xture will now be in Blackout

mode. To deactivate Blackout mode, select “No” and press Enter.

I PAN - Pan Inversion

1. Press the MENU button until “I PAN” is displayed, press ENTER.

Either NO or 1 will be displayed.

2. To activate the Pan inversion press the UP or DOWN buttons until

I is displayed, press ENTER to conm. To deactivate Pan inversion,

select No and press Enter.

I TLT - Tilt Inversion

1. Press the MENU button until “I TLT” is displayed, press ENTER.

Either NO or 1 will be displayed.

2. To activate the Tilt inversion press the UP or DOWN buttons until

I is displayed, press ENTER to conm. To deactivate Tilt inversion,

select No and press Enter.

LED - With this function you can have the LED display

turn off after 10 seconds.

1. Press the MENU button until “LED” is displayed, press ENTER.

2. The display will show either “ON” or “OFF”. Press the UP or

DOWN buttons to select “ON” to keep the LED display on at all

times, or “OFF” to switch to have the LED display switch o after 10

seconds.

3. Press ENTER to conrm. To make you LED display reappear again

press any button.

Inno Spot LED WiFly System Menu

ENTER. Either “SH 1”, “SH 2”, “SH 3” or “SH 4” will be displayed.

2. Press the UP or DOWN buttons to nd you desired show and then

press ENTER to conm and exit.

SHOWS:

Show 1 - For xtures placed on the oor, the tilt movement angle is

210°

Show 2 - For fixtures fixed to the ceiling or truss, the tilt movement

angle is 90°.

Show 3 - For fixtures placed on a table or stage. The beam is pro-

jected at the audience’s direction; i.e. in front of the stage. Pan move-

ment angle (left to right to left) is 160°. Tilt movement angle is 90°.

Show 4 - For fixtures fixed to the ceiling or truss. The beam is pro-

jected at the audience’s direction; i.e. in front of the stage. Pan move-

ment angle (left to right to left) is 160°. Tilt movement angle is 90°.

SLND - This will let you set the unit as a slave in a

master/slave conguration.

1. Press the MENU button until “SLND” is displayed, press ENTER.

Either “SL 1” or “SL 2” will be displayed.

2. Press the UP or DOWN buttons until your desired setting is dis-

played, press ENTER to conm.

NOTE: In a Master/Slave conguration you can set one xture to

Master and then set the next xture to “SL 2”, the xtures will now

have contrast movement to each other.

SOUN - Sound Active mode.

1. Press the MENU button until “SOUN” is displayed, press ENTER.

2. The display will show either “ON” or “OFF”. Press the UP or

DOWN buttons to select “ON” to activate sound active mode, or

“OFF” to deactivate sound active mode.

3. Press ENTER to conrm.

Inno Spot LED WiFly System Menu

Bekijk gratis de handleiding van Adj Inno Spot LED WiFLY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.