Adj Inno Color Beam LED handleiding
Handleiding
Je bekijkt pagina 10 van 12

©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 19 ©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 20
Inno Color Beam LED UC3 Control
Inno Color Beam LED Power Cord Daisy Chaining
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 4 xtures maximum. After 4 xtures you will need to
use a new power outlet. They must be the same xtures. DO NOT
mix xtures.
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Show
1-4
1. Pan position
2. Tilt position
3. Dimmer
Fade Speed
1. Fast
2. Middle
3. Slow
Mode Sound
(LED OFF)
Show
(LED ON)
Show
(LED Fast Blinking)
(LED Slow
Blinking)
Inno Color Beam LED Photometric Chart Inno Color Beam LED Installation
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
The Inno Color Beam LED is fully operational in two dierent mount-
ing positions, hanging upside-down from a ceiling or set on a at level
surface. To avoid internal damage to the unit, never mount the unit on
its side as illustrated above. Be sure this xture is kept at least 0.5m
away from any ammable materials (decoration etc.). Always use and
install the supplied safety cable as a safety measure to prevent acci-
dental damage and/or injury in the event the clamp fails. Never use
the carrying handles for secondary attachment.
Bekijk gratis de handleiding van Adj Inno Color Beam LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Inno Color Beam LED |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2172 MB |
Caratteristiche Prodotto
| Soort lamp | LED |
| Stroombron | AC |
| Land van herkomst | Verenigde Staten |
| Ingangsspanning | 100 - 240 V |
| Levensduur lamp | 50000 uur |







