Adj Illusion Dotz 3.3 handleiding

Niet gecategoriseerd

Adj

24 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 23ADJ Products, LLC - www.adj.com - Illusion Dotz 3.3 Instruction Manual Page 22

Illusion Dotz 3.3 System Menu

3. Press UP or DOWN buttons, until “Flip Display” is displayed, and

press ENTER.

4. Either “O” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.

5. Press ENTER to conrm your selection or press MODE to exit.

KEY LOCK - With this function activated the buttons will lock autom-

matically after 15 seconds.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press the UP or DOWN buttons until “LCD Set” is displayed, press

ENTER.

3. Press UP or DOWN buttons, until “Key Lock” is displayed, and

press ENTER.

4. Either “O” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.

5. Press ENTER to conrm your selection or press MODE to exit.

DISPFLASH - With this function activated the the display will ash

when there is not DMX signal.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press the UP or DOWN buttons until “LCD Set” is displayed, press

ENTER.

3. Press UP or DOWN buttons, until “DispFlash” is displayed, and

press ENTER.

4. Either “O” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.

5. Press ENTER to conrm your selection or press MODE to exit.

Dimmer Curve

DIM CURVE - Select 1 of 5 dimming curves. See page 45 for the

dimming curve chart.

Illusion Dotz 3.3 System Menu

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press the UP or DOWN buttons until “Dim Curve” is displayed,

press ENTER.

3. Either “Standard”, “Stage”, “TV”, “Architectural”, or “Theatre”

will be displayed, use the UP and DOWN buttons to toggle between.

5. Press ENTER to conrm your selection or press MODE to exit.

Temp. C/F

TEMP. C/F - With this function, you can change the temperature dis-

play to show either Celsius or Fahrenheit.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press UP or DOWN buttons, until “Temp. C/F” is displayed, and

press ENTER.

3. Either “Celsius” or “Fahrenheit” will be displayed, use the UP and

DOWN buttons to toggle between.

4. Press ENTER to conrm your selection or press MODE to exit.

Init. Eect

INIT. EFFECT - In this menu you are able to check initial eect posi-

tion.

1. Press the MODE button to access the main menu. Press the UP or

DOWN buttons so that “Function” is highlighted, then press ENTER.

2. Press UP or DOWN buttons, until “Init. Eect” is displayed, and

press ENTER.

3. “XXX” will be displayed. “XXX” represents the current eect posi-

tion.

4. Press ENTER or press MODE to exit.

CHANNEL VALUE - This function will allow you to see the DMX

value of each DMX channel that is currently being used at the time.

1. Access the main menu, and press the UP or DOWN buttons so

Bekijk gratis de handleiding van Adj Illusion Dotz 3.3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.