Adj Hydro Flex L7 handleiding
Handleiding
Je bekijkt pagina 14 van 46
14
REMOTE DEVICE MANAGEMENT (RDM)
NOTE: for RDM to work properly, RDM enabled equipment must be used throughout the entire
system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for
lighting, allowing the DMX systems of the xtures to be modied and monitored remotely. This protocol
is ideal for instances in which a unit is installed in a location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled controller
to send out a signal to devices on the wire, as well as allowing the xture to respond (known as a GET
command). The controller can then use its SET command to modify settings that would typically have to
be changed or viewed directly via the unit’s display screen, including the DMX Address, DMX Channel
Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:
Code Parameter ID
[0x0011] Proxied Device Count
[0x0200] Sensor Denition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
[0x0405] Device Power Cycles
[0x0600] Pan Invert
Please be aware that not all RDM devices support all RDM features, and therefore it is important
to check beforehand to ensure that the equipment that you are considering includes all of the features
that you require.
The following parameters are accessible in RDM on this device:
RDM Code Device ID
Device Model ID
Personality ID
0x0047 47 0000 47
Basic 16 (1), Standard 25 (2), Extended 34 (3),
Extended 42 (4), Extended 50 (5),
Standard RGBW 26 (6), Standard CMY 25 (7),
Extended CMY 28 (8)
Code Parameter ID
[0x0601] Tilt Invert
[0x0602] Pan Tilt Swap
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x1031] Preset Playback
[0x0122] Default Slot Value
[0x00B0] Language
[0x00A0] Language Capabilities
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages
Bekijk gratis de handleiding van Adj Hydro Flex L7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Hydro Flex L7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5091 MB |
