Adj FREQ 16 Strobe handleiding
Handleiding
Je bekijkt pagina 8 van 10
©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 15
©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 16
FREQ 16 Strobe UC3 Control
Master-Slave Operation: This function will allow you to link up to 16
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The rst unit in the chain (master) will use the female XLR
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode. After you
have set your desired operational mode, press the MENU button
until “SLND” is displayed, and Press ENTER. Use the UP or
DOWN buttons to nd the “MAST” setting and press ENTER.
3. On the slave units tap the MENU button until “SLND” is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either “SL 1” or “SL 2”. Once you have made your
choice, press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See UC3 Control below.
FREQ 16 Strobe Master-Slave Set Up
Blackout Blackout the unit
Function
Synchronous Strobe by auto
Synchronous Strobe by sound
(press and hold the button)
Select Show 1 – 12
Manual mode
)NO DEL( wohS )FFO DEL( ebortS edoM
FREQ 16 Strobe 1 Channel Mode
Channel Value Function
1 SHOWS
0 - 7 BLACKOUT
8 - 27 SHOW 1
28 - 47 SHOW 2
48 - 67 SHOW 3
68 - 87 SHOW 4
88 - 107 SHOW 5
108 - 127 SHOW 6
128 - 147 SHOW 7
148 - 167 SHOW 8
168 - 187 SHOW 9
188 - 207 SHOW 10
208 - 227 SHOW 11
228 - 247 SHOW 12
248 - 255 RANDOM SHOW
FREQ 16 Strobe 2 Channel Mode
Channel Value Function
1 MASTER DIMMER
0 - 255 0% - 100%
2 STROBING
0 - 8 NO FUNCTION
9 - 255 STROBING SLOW - FAST
FREQ 16 Strobe 16 Channel Mode
Channel Value Function
1 - 16 DIMMER
0 - 255 0% - 100%
Note: All shows are sound active when a music source is pres-
ent.
Bekijk gratis de handleiding van Adj FREQ 16 Strobe, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | FREQ 16 Strobe |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1882 MB |
