Adj Element QAIP handleiding
Handleiding
Je bekijkt pagina 20 van 29
ADJ Products, LLC - www.adj.com - Element QAIP User Manual Page 19
Operating Modes:
The Element QAIP has five operating modes:
• RGBA Dimmer Mode - Choose one of the four colors to remain static or adjust the intensity of
each color to make your desired color.
• Sound Active mode - The unit will react to sound, chasing through the built in programs. There
are 16 sound active modes.
• Auto Run Mode - In Auto Run mode, you can choose 1 of 16 color change modes, 1 of 16 color
fade modes, or a combination color change & color fade mode.
• Static Color Mode - There are 64 color macros to choose from.
• DMX control mode - This function will allow you to control each individual fixture traits with a
standard DMX 512 controller.
RGBA Dimmer Mode:
1. Plug the fixture in and press the MODE button “r: XXX” is displayed. You now are in Red dimming
mode. Press the UP and DOWN buttons to adjust intensity. After you have finished adjusting the
intensity, or if you would like to skip to the next color, press the SET UP button.
2. When “G: XXX” is displayed you are in Green dimming mode. Press the UP and DOWN buttons
to adjust intensity.
3. When “b: XXX” is displayed you are in Blue dimming mode. Press the UP and DOWN buttons to
adjust intensity.
4. When “A: XXX” is displayed you are in Amber dimming mode. Press the UP and DOWN buttons
to adjust intensity.
5. After you have adjusted the colors to make your desired color you can then activate strobing by
pressing the SET UP button to enter the strobe mode.
6. “FS: XX” will be displayed, this is strobe mode. The strobe can be adjusted between “00” (flash
off) to “15” (fastest flash).
Sound Active Mode:
1. Plug the fixture in and press the MODE button until “SoXX” is displayed. “XX” represents the current
sound active mode (1-16).
2. Use the UP or DOWN buttons to find your desired sound active mode.
3. Press the SET UP button to enter sound sensitivity adjustment. “SJ-X” will be displayed. Use the
UP or DOWN buttons to adjust the sensitivity. “SJ-1” is the lowest sensitivity, “SJ-8” is the highest.
“SJ-0” turns the sound sensitivity off.
Static Color Mode (Color Macros):
1. Plug the fixture in and press the MODE button until “CLXX” is displayed.
2. There are 64 colors to choose from. Select your desired color by pressing the UP and DOWN
buttons. After you have selected your desired color you can activate strobing by pressing the
SET UP button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between “FS.00” (flash
Element QAIP Operating Instructions
Bekijk gratis de handleiding van Adj Element QAIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Element QAIP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3574 MB |
