Adj Element QAIP handleiding
Handleiding
Je bekijkt pagina 18 van 29
ADJ Products, LLC - www.adj.com - Element QAIP User Manual Page 17
Element QAIP System Menu
MENU SUBMENU OPTIONS FUNCTIONS
DMX MODE
Address
~
DMX Address Setting
Channels
4 DMX Channel Mode
5 DMX Channel Mode
6 DMX Channel Mode
9 DMX Channel Mode
10 DMX Channel Mode
No DMX mode When the DMX signal is lost or interrupted, the unit will go into BLACKOUT mode.
Delay mode
~
Select the unit delay mode
SECONDARY Secondary Setting Designate the unit as a secondary unit in a primary-secondary set up.
DIMMER MODE
Red Dimmer
~
Adjust the intensity of the red color.
Green Dimmer
~
Adjust the intensity of the green color.
Blue Dimmer
~
Adjust the intensity of the blue color.
White Dimmer Adjust the intensity of the amber color.
~
Flash Adjustment
~
Adjust the flash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.
SOUND MODE
Sound Active
~
Select 1 of 16 sound active programs.
Sensitivity Adjust
~
Adjust the sound sensitivity. “0” is the lowest level, and “8” is the highest level.
AUTO
RUN
MODE
Color Fade Mode
~
Select 1 of 16 color fade modes.
Color Change Mode
~
Color Change &
Color Fade Mode
This mode will run both color change and color fade continuously.
Speed Adjustment
~
Adjust the running speed of the current mode.
STATIC COLOR
MODE
Color Select
~
Select 1 of 64 static colors.
Flash Adjustment
~
BATTERY LIFE
ENERGY SAVE
LOADING
SET UP
Battery Life Display
/
~
Displays the current battery life.
Energy Saving
Mode
Activates energy saving mode.
Deactivates energy saving mode.
Load On/Off Select
Activates battery power.
Deactivates battery power.
Display
LED display is always on.
OTHER
LED display turns off after 30 seconds.
IR Remote On/Off
IR remote function is activated.
IR remote function is deactivated.
Display
Normal/Inverted
LED digital display is normal.
LED digital display is inverted.
Menu Lock
Deactivate display lock. (Display lock is not active)
Activate display lock. (Press the MODE button for 3 seconds to unlock the display)
Activate display lock two.
Initialization Mode Default to factory settings.
WIFLY SET UP
WiFly Address
~
Set the WiFly address.
WiFly Function
On/Off
WiFly function is active.
WiFly function is deactive.
When the DMX signal is lost or interrupted, the unit will hold at the LAST DMX setting.
When the DMX signal is lost or interrupted, the unit will run an auto program.
Select 1 of 16 color change modes.
Adjust the flash speed. “00” is Off, “01” is the slowest speed, and “15” is the fastest.
“b---” means that the battery is not being used.
“bXXX” means that the battery is in use. “XXX” represents the battery charge percentage.
“b000” means that the battery has no charge.
“b100” means that the battery is at full charge.
(Press UP-DOWN-UP-DOWN to unlock the display)
Bekijk gratis de handleiding van Adj Element QAIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Element QAIP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3574 MB |
