Adj Dotz Panel 2.4 handleiding
Handleiding
Je bekijkt pagina 11 van 24
Universal DMX Control: This function allows you to use a Elation® universal DMX-512 controller to
control the chases and patterns, dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs. The Dotz Panel 2.4 has 5 DMX channel modes; a 3
Channel Mode, 6 Channel Mode, 8 Channel Mode, 24 Channel Mode, & 29 Channel Mode. See the
System Menu section of this manual for detailed instructions regarding how to select your desired
channel mode.
1. This function will allow you to control each individual xture’s traits with a standard DMX 512
controller such as the Elation® Show Designer™ or the Elation® DMX Operator.™
2. To run your xture in DMX mode, follow directions shown in the System Menu section of this
manual to set your DMX address and DMX Channel mode.
3. Plug in the xture via the XLR connections to any standard DMX controller.
4. For longer cable runs (more than a 100 feet) use a terminator on the last xture.
Dotz Panel 2.4 Universal DMX Control
ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 11
Dotz Panel 2.4 Primary-Secondary Configuration
Primary-Secondary Operation: This function will allow you to link up to 16 units together and oper-
ate without a controller. The units will be sound activated. In Primary-Secondary operation one unit
will act as the controlling unit and the others will react to the controlling units programs. Any unit can
act as a Primary or as a Secondary.
1. Using approved DMX data cables, daisy chain your units together via the XLR connector on the
rear of the units. Remember the Male XLR connector is the input and the Female XLR connec-
tor is the output. The rst unit in the chain (primary) will use the female XLR connector only, while
the last unit in the chain will use the male XLR connector only. For longer cable runs, it is strongly
recommended to use a teminator on the last xture.
2. On the Primary unit, designate the unit as a “Primary” unit following the instructions shown in the
System Menu section of this manual. Then set your desired operating mode.
3. On the Secondary units press the MODE button until “Secondary Mode” is displayed.
4. The Secondary units will now follow the Primary unit.
Bekijk gratis de handleiding van Adj Dotz Panel 2.4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Dotz Panel 2.4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4098 MB |
Caratteristiche Prodotto
| Soort bediening | Knoppen |
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 6400 g |
| Breedte | 164 mm |
