Adj Boom Box FX1 handleiding
Handleiding
Je bekijkt pagina 7 van 14
ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Boom Box FX1 Instruction Manual Page 13
System Menu: When making adjustments press ENTER to
conrm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
ADDR - DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until “ADDR” is
displayed, press ENTER.
2. The current address will now be displayed and ashing. Press the
UP or DOWN buttons to nd your desired address. Press ENTER to
set your desired DMX address.
CHND - This will let select your desired DMX channel
mode.
1. Press the MENU button until “CHND” is displayed, press ENTER.
The current DMX channel mode will be displayed
2. Press the UP or DOWN buttons to nd your desired DMX channel
mode and press ENTER to conm and exit.
SLND - This will let you set unit as a master or slave in a
master/slave conguration.
1. Press the MENU button until “SLND” is displayed, press ENTER.
Either “MAST”, “SL 1”, or “SL 2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to conm.
NOTE: In a Master/Slave conguration you can set one xture to
Master and then set the next xture to “SL 2”, the xtures will now
have contrast movement to each other.
SHND - Show modes 0-9 (Factory programs).
1. Press the MENU button until “SHND” is displayed, press ENTER.
Boom Box FX1 System Menu Boom Box FX1 System Menu
Bekijk gratis de handleiding van Adj Boom Box FX1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Boom Box FX1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2093 MB |
