Adj AV2X handleiding
Handleiding
Je bekijkt pagina 6 van 23
ADJ Products, LLC • Los Angeles, Ca USA • Kerkrade, The Netherlands
6
SAFETY GUIDELINES
This panel is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is
important to follow all instructions and guidelines in this manual. ADJ is not responsible for injury and/or
damages resulting from the misuse of this panel due to the disregard of the information printed in this
manual. Only qualified and/or certified personnel should perform the installation of this panel and all
included and/or rigging accessories. Only the original included rigging parts and/or rigging accessories
for this panel should be used for proper installation. Any modifications to the panel, included and/or
rigging accessories will void the original manufactures warranty and increase the risk of damage and/or
personal injury.
PROTECTION CLASS 1 - PANEL MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS PANEL.
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO
THIS PANEL AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES
IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT
TO ANY WARRANTY CLAIMS AND/OR REPAIRS. DO NOT PLUG PANEL INTO A
DIMMER PACK! NEVER OPEN THIS PANEL WHILE IN USE! UNPLUG POWER BEFORE
SERVICING PANEL! NEVER TOUCH FRONT OF PANEL DURING OPERATION, AS IT
MAY BE HOT! KEEP FLAMMABLE MATERIALS AWAY FROM PANEL.
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE PANEL TO RAIN AND/OR MOISTURE!
DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE PANEL!
DO NOT touch panel housing during operation. Turn OFF power and allow approximately 15 minutes
for panel to cool down before serving.
DO NOT: Operate a panel if any cover is open and/or removed.
DO NOT shake panel, avoid brute force when installing and/or operating panel.
DO NOT: Expose any part of the panel to open flame or smoke. Keep panel away from heat sources
such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
DO NOT: Install/use panel in extreme hot/humid environments, or handle without ESD precautions.
DO NOT: Exceed an operation temperature of 40°C (104°F), doing so will damage the panel.
DO NOT operate panel if power cord is frayed, crimped, damaged and/or if any of the power cord
connectors are damaged and do not insert into the panel securely with ease. NEVER force a power
cord connector into the panel. If the power cord or any of its connectors are damaged, replace it
immediately with a new one of similar power rating.
DO NOT block air ventilation slots/vents. All fan and air inlets must remain clean and never blocked.
Allow approximately 6” (15cm) between panel and other devices or a wall for proper cooling.
ALWAYS disconnect panel from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the
wire portion of the cord.
Bekijk gratis de handleiding van Adj AV2X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | AV2X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16160 MB |
