Adj Aria X2 IPC Bridge handleiding
Handleiding
Je bekijkt pagina 12 van 23

12
INSTALLATION GUIDELINES
TRUSS MOUNT INSTALLATION
Insert an M12 bolt (not included) through the mounting hole of the clamp (not included), and then thread
it into the matching mounting hole on the side of the device opposite from the antennas. The bolt must
be threaded 24mm (0.9 in) into the xture base. Loop a safety cable around the truss and through the
safety cable pass-through located at one corner of the device near the mounting clamp hole. Always
use a safety cable of the proper weight rating when installing the device in a suspended environment.
FALLING DEVICES CAN CAUSE SEVERE INJURY OR SERIOUS EQUIPMENT
DAMAGE! FOR THIS REASON, DEVICES SHOULD BE INSTALLED AND INSPECTED
ONLY BY QUALIFIED PERSONNEL. DO NOT INSTALL THE UNIT IF YOU LACK THE
QUALIFICATIONS TO DO SO, OR IF YOU HAVE DOUBTS ABOUT THE SAFETY AND
SECURITY OF THE INSTALLATION SETUP OR LOCATION!
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS DEVICE IN A
SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT FALL IF THE
CLAMP FAILS.
MOUNTING
CLAMP
SAFETY
CABLE
PASS
THRU
SAFETY
CABLE
Bekijk gratis de handleiding van Adj Aria X2 IPC Bridge, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Adj |
Model | Aria X2 IPC Bridge |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3059 MB |