Adder View Matrix C110 handleiding
Handleiding
Je bekijkt pagina 26 van 84
25
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
USR - UI Settings
UI Settings
OSD Notication Position (plus Timeout) - Determines the
location and persistence of notications issued on users’ screens.
OSD Banner Position (plus Timeout) - Determines the location and
persistence of banners (a banner is a popup showing the current preset/
channel name) displayed on users’ screens.
OSD Timeout - Determines the persistence of the OSD if no
interaction has taken place.
LED Brightness - Determines the brightness of the front and rear
panel LED indicators.
Language - Determines the language used for all text labels within the
conguration pages.
Keyboard Layout - Determines the appropriate keyboard layout for
use with the conguration pages.
Touch Show OSD - (When touch screens are used) Determines
whether the Show OSD icon is displayed continually, not at all or
automatically.
Touch Show Icon Size - (When touch screens are used) Determines
the size of the Show OSD icon. Options range from Small to Very Large.*
Mouse Show OSD - Determines the mouse button press combination
that should be used to call the OSD.
Hotkey Modiers - Determines the special modier keys that will be
used to form the basis of all the hotkey functions listed below.
Show OSD... ...Last Preset - These entries determine the hotkey
letters required (together with the modier keys selected above) to
enact various presets and modes.
To get here
You can access this page in two ways:
1 On the console keyboard attached to the USR, access the OSD by
pressing CTRL + ALT + C or tap the touchscreen icon. The
Preset Selection page will be displayed.
2 Click the icon in the top right corner.
3 If necessary, click the UI Settings link.
OR
1 Connect a computer to the same network as the USR.
2 Run a web browser and enter the IP address of the USR:
https://169.254.1.32 (this is the default address for port 1).
(Note: the second USR network port defaults to https://169.254.1.43).
3 Click the icon in the top right corner.
4 If necessary, click the UI Settings link.
Connection Notication Settings - A collection of settings that can
be used to congure the visual appearance, location, and timeout for
notications. Click the arrow to reveal the available options:
Enabled tick box - enables/disables connection notication messages for
each connection type.
Label - denes the text label to use in the notication messages in place
of the “%type%” token - see “Connection Notication Messages” on
next page.
Message Position - “None” = All Connection notications messages are
disabled (regardless of enabled settings above). All other values for this
setting enable the messages for the given connection types above that
are enabled.
Timeout - 0 = no timeout, messages remain on screen indenitely (unless
user “clicks” on them to clear them using the mouse when OSD is
onscreen). Any other value sets the duration in seconds that a given
notication message remains on screen.
Message Colour - set the colour of the notication messages.
Size - set the size of the notication messages.
Margins (top,right,bottom,left) - each can be set to None, Small, Medium
or Large to determine an offset that will be applied to the notication
messages dependent on their displayed position.
Border Enabled - enable/disable border. If enabled, then a border is drawn
around the whole screen (only on the video head that shows the OSD)
when any preset connection is in an error state/status.
Border Colour - set the border colour to use.
Size - width of border to use.
continued
Bekijk gratis de handleiding van Adder View Matrix C110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adder |
| Model | View Matrix C110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16799 MB |
