Adder View Matrix C1100 handleiding
Handleiding
Je bekijkt pagina 8 van 84
7
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Installation
CAM (COMPUTER ACCESS MODULE) CONNECTIONS
CAM video link
The ADDERView Matrix CAM is supplied with a single video connector: either
DisplayPort™
or HDMI
®
depending on the chosen variant. Video resolutions up to
2560x1600 @ 60Hz are supported, the highest frame rate is 1920x1080@120Hz.
To make a video link
1 Connect the video connector of the CAM to the video socket of the host
computer:
CAT 5, 5e, 6, or 7 link Host
computer
HDMI
®
video port
Host
computer
DisplayPort™
video
connector
CAM link connection
Use the network port to join the ADDERView Matrix CAM either directly to an
ADDERView Matrix USR or via a suitable a network switch. It is also possible to connect
a computer directly to the network port for conguration purposes.
To make a link connection
1 Insert a standard network cable into the socket on the front panel of the CAM.
2 Connect the other end of the cable either directly to an ADDERView Matrix USR or a
suitable network switch.
HT
Bekijk gratis de handleiding van Adder View Matrix C1100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adder |
| Model | View Matrix C1100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16799 MB |
