Adder View Matrix C1100 handleiding
Handleiding
Je bekijkt pagina 28 van 84
27
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
USR - Presets
Preset Conguration
This page lists the details and connection status for the current channel/
preset which the USR is using.
Each row details one type of connection which has been made. It lists
the output port on the USR and the source port from the CAM which it
is connected to, as well as the name of the device it is connected to.
Click this icon in the Actions column to remove a particular row of
connections from the list.
Click this icon to manually set the password for the specied device
so that it has the necessary permission to access the appropriate
channel on the selected CAM. In most connections, the access
passwords for all the peripherals will be set collectively during the
initial linking between the USR and CAM. The links given here
provide an alternative method as backup.
Click this icon to add a new connection to the list.
Auto Congure Preset - Select to automatically create a new set of
connection presets from the selected CAM.
Analog and digital audio
AVM units support both analog and digital audio connections from the
host PC. Although originating from possibly the same audio source,
these two audio types are switched completely separately and cannot be
mixed. In the connections table, the two types are represented thus:
• Analog audio ( ) at USR only connects to (
or ) at CAM.
• Digital audio (
1
or
2
) at USR only connect to (
1
or
2
) at
CAM.
For more details, please see Support for analog and digital audio.
To get here
You can access this page in two ways:
1 On the console keyboard attached to the USR, access the OSD by
pressing CTRL + ALT + C or tap the touchscreen icon. The
Preset Selection page will be displayed.
2 Click the icon in the top right corner.
3 If necessary, click the Presets link.
4 Either add a new preset (click +) or click to edit an existing one.
OR
1 Connect a computer to the same network as the USR.
2 Run a web browser and enter the IP address of the USR:
https://169.254.1.32 (this is the default address for port 1).
(Note: the second USR network port defaults to https://169.254.1.43).
3 Click the icon in the top right corner.
4 If necessary, click the Presets link.
5 Either add a new preset (click +) or click to edit an existing one.
Status
The following icons may be shown within the Status column:
The connection is fully operational.
A connection has not been established.
The control protocol version is incompatible/unsupported between
the peer and this device.
The control protocol security settings are incompatible/unsupported
between the peer and this device.
The connection failed the authorisation stage (most likely a bad
password).
The connection is established but there is no input signal being
received from the peer device.
The connection has an invalid or unsupported input source signal
peer device (audio and video connections only), or
The connection is currently out of resources at the peer device, or
There is insufcient network bandwidth to support the requested
data for this connection.
The encoding of the source data at the peer has stopped (due to an
error or fault).
There is no input device available on the port for this connection
(eg. no PC connected).
There is no output device available on the port for this connection
(eg. no monitor connected).
There is no data currently being received by the device.
The video data for the connection produces an output signal that
is out of range for the capabilities of this device, or the appliance
connected to this device, or
The device is currently out of resources to process the video data
for this connection.
The audio data for the connection produces an output signal that
is out of range for the capabilities of this device, or the appliance
connected to this device, or
The device is currently out of resources to process the audio data
for this connection.
The decoding of the data at this device has stopped (due to an error
or fault).
Note: The appearance of this
page differs slightly differently
depending on whether it is
accessed from the WebUI
or the OSD. The important
difference is that presets can
only be added or edited when
the page is accessed from
the OSD and not from the
WebUI.
Bekijk gratis de handleiding van Adder View Matrix C1100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adder |
| Model | View Matrix C1100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16799 MB |
