Adder RED-PSU PRO handleiding
Handleiding
Je bekijkt pagina 9 van 19
8
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Conguration
ACCESSING THE MANAGEMENT APPLICATION
Each RED-PSUPRO is congured via its network connections using an intuitive browser-
based application, called Redundant Power Supply Manager. This secure, password
protected application is accessible by any authorized admin user, located anywhere.
To access the management application
1 Use a computer that is directly or indirectly (i.e. via a network switch) connected to
the RED-PSUPRO unit. If you need to make a temporary connection, see right
Ü
2 Run a web browser on your computer and enter the IP address of the RED-PSUPRO.
The default IP address setting is: 192.168.1.22
3 If requested, enter your username and password to log on.
Note: The default username and password are ‘admin’ and ‘password’ respectively.
The opening page of the management application should be displayed:
To temporarily connect a computer to the network port
1 If you need to make a temporary connection for conguration
purposes, use a standard patch cable (cross-over or straight
connections are both supported) to link the Ethernet 10/100
network port ( ) on the front panel of the main chassis to
your computer.
Patch cable
link to your
computer
P1 P2 INVLD OVLD CLEAR RESET
The various pages of the manager app are discussed within the remainder of this chapter.
HT
Bekijk gratis de handleiding van Adder RED-PSU PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adder |
| Model | RED-PSU PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3670 MB |
