ADB RDM Dimmer Manager handleiding
Handleiding
Je bekijkt pagina 20 van 74
Dimmer Manager software
Instruction Manual - page 18
Issue: 004
Lighting Technologies
Adding a NETPORT XT
• Menu Bar > NetPorts > NETPORT XT Manager
• click Scan
This opens a new window Netport XT Scan. On the right you see all the NETPORT XT found on
the network. This may include units belonging to other stages or studios in the same complex.
• on the right, select the NETPORT XT you want to add (selected = blue)
• click Use
This will move the NETPORT XT to the left hand column.
• click Exit to close
Replacing a NETPORT XT by a new NETPORT XT
You may wish to replace a NETPORT XT in an existing ADN system. The following procedure
explains an easy method.
• Menu Bar > Netports > NETPORT XT Manager
• click Scan
This opens a new window Netport XT Scan. On the right you will see all the NETPORT XT found
on the network. This may include units belonging to other stages or studios in the same complex.
• on the right, select the NETPORT XT you want to use (selected= blue)
• click Replace
This will move the NETPORT XT to the left hand column
• click Exit to close
Note: the name of the group icon representing the NETPORT XT is not affected by this swap.
Please check the old IP address is not mentioned in the group name.
Adding a dimmer unit
This function is useful for example when you add temporary dimmer units to a permanent system,
e.g. portable dimmers for decentralised use. Once they’re included, Dimmer Manager will check
for their presence - and can show them as absent.
When you Save, this particular *.dim file will store all the ‘Used’ dimmer units, including the
temporary ones.
When additional dimmer units have been connected to a NETPORT XT, you must update the file.
• check that all dimmer units are connected to the ADN Network, and powered up
• select On Line mode and User Level 3
• Menu Bar > NetPorts > NETPORT XT Manager
• click on the row number to select the NETPORT XT to which the dimmer units were added
(selected = blue)
• click Edit
This opens a new window "NETPORT XT"
• click scan network
This starts an automatic scan of the ADN ports of that NETPORT XT. The right-hand window
lists present units + units found earlier. New units are shown with their Network Adress but not
yet with a model name.
• select all the new dimmer units you want to monitor (selected=blue)
• for multiple selections:
• depress the CTRL key and keep it depressed
• select by a single-clicking on dimmer units
• click Use Dimmer
This is followed by a download (dimmer to PC) of the parameters. The model name appears.
• click Exit to close the window "Netport XT"
• click Exit to close the window "Netport XT Manager"
Bekijk gratis de handleiding van ADB RDM Dimmer Manager, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | RDM Dimmer Manager |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13664 MB |
