ADB Eurorack 60 Dimswitch handleiding

74 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 74
Dimmer Manager software
Instruction Manual - page 15
Issue: 004
Lighting Technologies
Chapter 5: Getting started – the on-line version
This chapter will explain how you can establish communication between the Dimmer Manager
PC, a NETPORT XT and ADB dimmers.
IP settings
Off-line operation does not require particular IP settings. You can view *.dim files (such as the
sample file), edit them, create virtual systems,… without worrying about TCP/IP.
Once you go OnLine with dimmers, two numbering schemes are critical:
the IP settings of the Dimmer Manager PC and other Ethernet nodes such as NETPORT XT
the Network Addresses on the ADN network (EIA-485)
You will have to plan the IP addresses for all the TCP/IP devices connected to your Ethernet-for-
lighting network.
This is a simple task for a "Dimmer Manager only" Ethernet network: the devices include the
Dimmer Manager PC and one or several NETPORT XT (used as Ethernet/ADN converter).
A broader "lighting" network may additionally include lighting consoles using Ethernet (ADB’s
PHOENIX range,…), and Ethernet/DMX converters such as NETPORT and NETPORT XT.
If you’re not familiar with TCP/IP configuration, please ask a knowledgeable IT person. Also ask
him/her for advice if you would like to use the Dimmer Manager PC for other applications requiring
TCP/IP (e.g. a portable PC also used for Internet access).
Required IP settings for the PC
Please provide the following information to your friendly IT person:
the Ethernet-for-lighting network should be independent of other Ethernet networks; any
connection to other networks should be evaluated with extreme care
NETPORT XT uses 10BaseT and TCP/IP
general requirements for the PC: see Hardware requirements
the Dimmer Manager PC must be set to a fixed IP address
that fixed IP address must be 2.x.y.z where x.y.z is to be selected by you
subnet mask 255.0.0.0
each NETPORT XT has a fixed IP address 2.a.b.c; it is printed on the back
direct connection between the PC and a NETPORT XT, with a cross-link cable, usually
works
Note: other equipment using class A IP addresses (2.a.b.c) includes Art-Net products in general;
lighting consoles such as ADB PHOENIX and MENTOR; ArtDMX-to-DMX converters such
ADB NETPORT; visualisers …

Bekijk gratis de handleiding van ADB Eurorack 60 Dimswitch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkADB
ModelEurorack 60 Dimswitch
CategorieVerlichting
TaalNederlands
Grootte13664 MB