ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 80 van 96
EURODIM TWIN TECH
Page 78 sur 92
− Present:
• "Yes": detection of the Ethernet frame corresponding to the universe,
• "No": no reception of the Ethernet frame corresponding to the universe.
− Fail: action implemented in the absence of the universe (see “Priority/DMX fail” menu), three actions
are possible:
• "last value": the last values received to control the circuits are used permanently as long as the
universe is missing,
• "cue" 0: the values of the universe channels are replaced by the content of cue 0 and will be
played as long as the universe is missing,
• "black": the control value of each circuit fades to zero intensity (black) in 5 seconds.
• When the universe is present once more, a fade is launched to the intensities given by ARTNET
in a time of 5 seconds.
When the universe is present once more, a fade is launched to the intensities given by ARTNET in a time of
5 seconds.
− start addr.: value of the universe channel to address cabinet output 1, see "ARTNET PATCH" menu
• "x": 1 ≤ x ≤ 512
• "not used": channel value = 0 or > 512
• "- - - - -": no circuit physically present in cabinet location 1, or circuit identification error in
cabinet location 1 or operating fault.
− Patch: see "ENET PATCH" menu,
• Yes: the addressing entered in each patch at the circuits is not in ascending order,
• No: the addressing entered in each patch at the circuits is in ascending order, e.g. 1, 2, 3, 4,….,
128 in the case where 32 modules are present in the cabinet.
− Subnet: value between 0 and 15, see "ENET SET" menu
− Port: value between 0 and 15, see "ENET SET" menu
Note: When the ARTNET entries are controlled by an ISIS rotating ADB console, all the subnets must have
the same number.
Ethernet Information
The IP address of each controller and the value of the sub-network mask are given.
Important: The IP addresses of each controller must be different. If this is not the case, it is imperative to
change the IP address (See ENET SET menu).
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
