ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 57 van 96
EURODIM TWIN TECH
Page 55 sur 92
According to the output function selected, the - value of corresponding patches A and B is displayed.
Adjust, in the same manner:
− the output control intensity, value row, intensity between 0 and 100% (FF)
− the output control duration, delay row, duration between 0 ( ~ 0.5 secs) and 60 secs
Touch the screen or use the wheel to select either the manual or automated test.
Manual test: only the selected output will be controlled with automated variation of the intensity.
Automated test: all outputs starting from the selected output will be tested one after the other throughout
the duration and with variation of the intensity except the channels defined as “undefined slot” or “Empty
slot”.
Press the "START" key to launch the manual or automated cycle.
Press the same "START" key to stop the manual or automated cycle.
7.7 LOAD/SAVE MENU
This function is used to save or load the parameters of the cabinet, such as patch A & B, the multiplying
factor, the laws and the power configuration. Furthermore, it is possible to choose to save the 80+1 cues
upon confirmation.
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
